-
×
CAP 3/16 VOES TAP
2 × 6,16 € -
×
HANDLEBAR 1 BEACH BK TBW
1 × 119,61 € -
×
COVER TIMING M8 FIN BK SV
2 × 96,85 € -
×
LIC.PLT.2IN1 W/TL BK
1 × 371,07 €
-
×
KICKSTAND +1 CH 7-19 FLH
1 × 106,85 € -
×
SEAT ROAD SOFA - FLT 08-UP - C
1 × 864,84 €
-
×
AXLE FLSH/MNT 25MM BLK
1 × 249,28 € -
×
DIPSTICK OIL PK 07-16FL
1 × 56,58 € -
×
CABLE CRUISCF56237-99A+6
1 × 91,64 €
-
×
COVER AC STEALTH CHR
1 × 277,22 €
-
×
TAPPET STD 48-57BT
1 × 119,13 € -
×
WINDSHIELD FLARE FXLRST SPORT
1 × 346,26 €
ELEKTRYKA MOTOCYKLOWA
18,50 € z VAT
''- Chrome plated ABS housing - With regular bulb (incandescent bulb) - Red lens - ECE approved lens.
ELEKTRYKA MOTOCYKLOWA
Mikro tarcza, tylne światło LED. 30 mm Przezroczysta soczewka
31,03 € z VAT
''- Clear lens 30mm diameter- Round - ECE approved - M6 x 16mm long mounting bolt on rear - No license plate illumination - Suitable for custom applications - Approx. dimensions 30mm diameter x 14mm deep
ELEKTRYKA MOTOCYKLOWA
31,03 € z VAT
''- Smoke lens 30mm diameter- Round - ECE approved - M6 x 16mm long mounting bolt on rear - No license plate illumination - Suitable for custom applications - Approx. dimensions 30mm diameter x 14mm deep
ELEKTRYKA MOTOCYKLOWA
Standard Co., wbudowany uchwyt bezpiecznika. Bez zaślepki, 20A
5,93 € z VAT
Takes stock style ATO or ATC blade fuses up to 20A. With 14 gauge (2.5mmý or 1.63mm diameter) wire leads. Note: Fuse is not included and must be ordered separately.
ELEKTRYKA MOTOCYKLOWA
6,26 € z VAT
Takes stock style ATO or ATC blade fuses up to 30A. With 12 gauge (3.31mmý or 2.05mm diameter) wire leads. Note: Fuse is not included and must be ordered separately.
ELEKTRYKA MOTOCYKLOWA
6,26 € z VAT
With protective cap. Takes stock style ATO or ATC blade fuses up to 30A. With 12 gauge (3.31mmý or 2.05mm diameter) wire leads. Note: Fuse is not included and must be ordered separately.
ELEKTRYKA MOTOCYKLOWA
364,66 € z VAT
UK wall plug. 4 bank charger 12V. Allows charging / maintaining 1 up to 4 batteries at once. Dimensions: 19.5cm wide x 9cm high x 17.5cm Deep.Microprocessor controlled; 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. CE approved. Note: When using multi-bank chargers; with the batteries in the bikes; you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.
ELEKTRYKA MOTOCYKLOWA
65,26 € z VAT
UK wall plug. 12V 0.8A. 110-240V. For up to 10Ah batteries. Waterproof; suitable for outdoor use. Resin filled ''crush proof'' case. Forgetting it on the floor then driving over it with your SUV. It can handle it! Charges flooded; sealed; maintenance free; AGM and lead acid batteries. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions approx. 7cm long; 10.7cm wide; 3.6cm high.
ELEKTRYKA MOTOCYKLOWA
181,78 € z VAT
UK wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled; 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. CE approved. Note: When using multi-bank chargers; with the batteries in the bikes; you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.
Brak w magazynie
ELEKTRYKA MOTOCYKLOWA
130,60 € z VAT
UK wall plug. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger; ready for portable operations or permanent mounting in a garage etc. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved.
Brak w magazynie
ELEKTRYKA MOTOCYKLOWA
Spyke, uniwersalny zestaw kabli do akumulatora DIY. Pozłacane oczka
114,01 € z VAT
72" (182cm) long battery cable with 6x 3/8" diameter eyelets. Allows the fabrication of 3 complete battery cables. Compatible with all OEM & high performance starters. Extremely flexible. They''ll bend effortless; similar to a spark plug cable. Over 1600 tin plated thin copper strands are used in this thick 4 gauge / 5.19mm diameter / 19mmý cable (stock is just 6 gauge / 13mmý); which is covered by a silicone jacket. The 6 included heavy-duty terminals are gold plated for best and lasting electrical conduction; These can be fully sealed to the jacket to make the cable waterproof and corrosion resistant. Designed to reduce voltage drop so maximum power to the starter motor is insured. Heat and vibration resistant.
ELEKTRYKA MOTOCYKLOWA
191,38 € z VAT
Un-molded stators will benefit from better cooling; they will help prevent overheating issues and generally offer a longer service life.
ELEKTRYKA MOTOCYKLOWA
108,44 € z VAT
Un-molded stators will benefit from better cooling; they will help prevent overheating issues and generally offer a longer service life.
ELEKTRYKA MOTOCYKLOWA
6,36 € z VAT
Fits classic Springer type headlamps. 12-Volt model for use in custom applications or for models that have been converted to 12-Volt.
ELEKTRYKA MOTOCYKLOWA
Niestandardowy wspornik tylnego światła Fat Bob. Chrom. Szerokość 6-1/2″
52,83 € z VAT
For narrow bobbed (Ducktail) fender. The right one for many custom jobs when a narrow bobbed rear fender is used. Gives good optical results when used in combination with the Cateye taillight.
ELEKTRYKA MOTOCYKLOWA
Wspornik do reflektora ”Vintage”. Rury widelca 39 mm. Czarny
124,16 € z VAT
Black painted steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.
ELEKTRYKA MOTOCYKLOWA
73,84 € z VAT
Reproduction headlamp for restauration purposes. No ECE approval.
ELEKTRYKA MOTOCYKLOWA
81,48 € z VAT
Reproduction headlamp for restauration purposes. No ECE approval. OEM replacement reference 4901-35C.
ELEKTRYKA MOTOCYKLOWA
79,10 € z VAT
Black headlamp shell with chrome plated trim ring. Reproduction headlamp for restauration purposes. No ECE approval. OEM replacement reference 4901-35C (chrome) and 4901-35 (black).
ELEKTRYKA MOTOCYKLOWA
108,22 € z VAT
Replacement OEM style square reproduction coils; for bikes that have been converted to a 12 volt electrical system. Includes a black spark plug cable kit. Compatible with points ignition only.
ELEKTRYKA MOTOCYKLOWA
108,22 € z VAT
Replacement OEM style square reproduction coils; for bikes that have been converted to a 12 volt electrical system. Includes a black spark plug cable kit. Compatible with points ignition only.
ELEKTRYKA MOTOCYKLOWA
101,40 € z VAT
Direct replacement for the stock taillight. With OEM style lens. Note 1: 73-98 model year taillights will fit 99-E03 models when 519538 bracket is used. Note 2: 99-E03 models require wiring harness modification.
ELEKTRYKA MOTOCYKLOWA
15,01 € z VAT
Single filament. For early style spotlamps. OEM replacement reference 68715-49; 11381-49.
ELEKTRYKA MOTOCYKLOWA
100,45 € z VAT
Replacement OEM early style (48-57 OHV style) square reproduction coils; for bikes with a 6 volt electrical system. Includes a black spark plug cable kit. Compatible with points ignition only. OEM style replacement for OEM 31604-48.
ELEKTRYKA MOTOCYKLOWA
Późny pierścień wykończeniowy reflektora. 4.5″. Czarny satynowy
10,37 € z VAT
Will fit most late style 4.5" passing lamps. Includes bolt and nut.
ELEKTRYKA MOTOCYKLOWA
Wpuszczany pierścień ozdobny z daszkiem. Reflektor 5-3/4″. Czarny
62,69 € z VAT
Visor style. Optically elongates the headlamp shell to give the recessed (frenched) headlamp look. Much quicker and more economical than replacing the complete headlamp. Replaces the original trim ring. OEM replacement reference 69738-05 (chrome version).
ELEKTRYKA MOTOCYKLOWA
Wpuszczany pierścień ozdobny z daszkiem. Reflektor 7″. Czarny
65,63 € z VAT
Visor style. Optically elongates the headlamp shell to give the recessed (frenched) headlamp look. Much quicker and more economical than replacing the complete headlamp. Replaces the original trim ring. OEM replacement reference 69733-05 (chrome version). Note: Compatible with OEM headlamps. On aftermarket headlamps fitment may be a bit ''loose''.
ELEKTRYKA MOTOCYKLOWA
Wpuszczany pierścień ozdobny z daszkiem. Reflektor 5-3/4″. Czarny błyszczący
62,69 € z VAT
Visor style. Optically elongates the headlamp shell to give the recessed (frenched) headlamp look. Much quicker and more economical than replacing the complete headlamp. Replaces the original trim ring. OEM replacement reference 69738-05 (chrome version).
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE