172,73  z VAT

- Rear - Single function - Smoke lens - Amber LED - ECE approved lens. Complete replacement for 86-up Touring models with stock large 3-1/4" flat lens turn signals. Comes pre-wired; without connectors. Turn signals for front and rear applications are the same; difference is in wiring for single/dual function. Note: In general EU models are not wired for dual function.

128,20  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

129,84  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

146,55  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

151,86  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

42,42  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

52,10  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

38,30  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

70,85  z VAT

''- Fork clamps to mount front turn signals to the fork tubes - 2-piece clamp design allows installation without fork tube removal - CNC machined aluminum - For 8mm threaded turn signals

+
Brak w magazynie
67,55  z VAT

''- Fork clamps to mount front turn signals to the fork tubes - 2-piece clamp design allows installation without fork tube removal - CNC machined aluminum - For 8mm threaded turn signals

75,63  z VAT

''- Fork clamps to mount front turn signals to the fork tubes - 2-piece clamp design allows installation without fork tube removal - CNC machined aluminum - For 8mm threaded turn signals

78,06  z VAT

''- Fork clamps to mount front turn signals to the fork tubes - 2-piece clamp design allows installation without fork tube removal - CNC machined aluminum - For 8mm threaded turn signals

166,01  z VAT

Chrome plated aluminum universal headlamp brackets.Will allow mounting the headlamp to fork tubes of 38-41mm diameter.

156,86  z VAT

Chrome plated aluminum universal headlamp brackets. Will allow mounting the headlamp to fork tubes of 42-43mm diameter.

184,33  z VAT

Chrome plated aluminum universal headlamp brackets. Will allow mounting the headlamp to fork tubes of 50; 52 or 54mm diameter.

+
Brak w magazynie
137,96  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 114mm; measured center to center of hole.

149,56  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 114mm; measured center to center of hole.

18,51  z VAT

Chrome plated brass body. Requires a 6mm (1/4") hole to mount. Approx. overall dimensions 10mm diameter x; 20mm long. Comes with 10cm pre-attached electrical wire and is M6 x 0.75 threaded. Note: This 1/4" (6mm) indicator light comes with a 5.5mm lens diameter.

18,51  z VAT

Chrome plated brass body. Requires a 6mm (1/4") hole to mount. Approx. overall dimensions 10mm diameter x; 20mm long. Comes with 10cm pre-attached electrical wire and is M6 x 0.75 threaded. Note: This 1/4" (6mm) indicator light comes with a 5.5mm lens diameter.

18,71  z VAT

Chrome plated brass body. Requires a 6mm (1/4") hole to mount. Approx. overall dimensions 10mm diameter x; 20mm long. Comes with 10cm pre-attached electrical wire and is M6 x 0.75 threaded. Note: This 1/4" (6mm) indicator light comes with a 5.5mm lens diameter.

18,51  z VAT

Chrome plated brass body. Requires a 6mm (1/4") hole to mount. Approx. overall dimensions 10mm diameter x; 20mm long. Comes with 10cm pre-attached electrical wire and is M6 x 0.75 threaded. Note: This 1/4" (6mm) indicator light comes with a 5.5mm lens diameter.

24,29  z VAT

No mount tabs; with metal housing. Automatic re-set. With 10-32" (4.76mm in diameter) threaded poles with nuts included. This is an automatic resetting circuit breaker; the fuse system as used in many pre-2000 H-D models for decades. When triggered it will; after some time; automatically re-set itself. Great for use in many stock or custom applications.

+
Brak w magazynie
54,08  z VAT

Fork tube clamps are chrome plated steel and will fit fork tubes with diameters as indicated. Brackets are aluminum with a polished finish.

50,68  z VAT

For 39-42mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Clear finished aluminum slotted brackets.

54,08  z VAT

For 47-50mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Clear finished aluminum slotted brackets.

+
Brak w magazynie
50,68  z VAT

For 47-50mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Black finished aluminum slotted brackets.

50,68  z VAT

Polished aluminum brackets with chrome clamps; 47-50 mm

50,68  z VAT

For 31-34mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Clear finished aluminum slotted brackets.

50,68  z VAT

For 55-58mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Clear finished aluminum slotted brackets.

54,08  z VAT

For 31-34mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Black finished aluminum slotted brackets.

50,68  z VAT

For 55-58mm fork tube diameter. Chrome plated steel fork tube clamps; fits fork tubes with diameters as indicated. Black finished aluminum slotted brackets.

54,08  z VAT

Fork tube clamps are chrome plated steel and will fit fork tubes with diameters as indicated. Brackets are aluminum with a polished finish.