LUSTERKA MANETKI OSPRZĘT
Black wrinkle finish. Displays speed; total distance and trip meter. LEDs are used for tachometer. Includes high/low beam; turn signal; oil and neutral light. Dimensions 110mm x 57mm x 37;5 mm. Note: For matching handlebar mount bracket see 500479 (chrome) or 500744 (black).
Sizzling hot in the 60''s; a pure chopper classic as used in ''Easy Rider''. Straight cut rear. Low sides. 6" wide. Radius 38cm. Raw uncoated 1.5mm thick steel.
UKŁAD WYDECHOWY
Chrome plated universal middle clamp; made from steel; with an 1-1/2" (3.8cm) inside diameter and without mount strip.
UKŁAD WYDECHOWY
Chrome plated universal middle clamp; made from steel; with an 1-5/8" (4.1cm) inside diameter and without mount strip.
UKŁAD WYDECHOWY
Chrome plated universal middle clamp; made from steel; with an 1-3/4" (4.4cm) inside diameter and without mount strip.
UKŁAD WYDECHOWY
Chrome plated universal middle clamp; made from steel; with an 2" (5.1cm) inside diameter and without mount strip.
SIEDZENIA KUFRY BAGAŻ
Matte Black fine. Synthetic leather with acrylic adhesive and polyester lining to minimise water intrusion. Approx. dimensions: 110 x 170mm. A hole in seat or saddle is bad enough; some have the irresistible desire to poke their finger in it; making it worse. These patches prevent the finger-poke and otherwise further tearing of the hole. The repair patches are selfadhesive and give a bike that true classic repaired look; especially when using a contrasting color.
SIEDZENIA KUFRY BAGAŻ
Matte black fine. Synthetic leather with acrylic adhesive and polyester lining to minimise water intrusion. Approx. dimensions: 210mm x 300mm. A hole in seat or saddle is bad enough; some have the irresistible desire to poke their finger in it; making it worse. These patches prevent the finger-poke and otherwise further tearing of the hole. The repair patches are selfadhesive and give a bike that true classic repaired look; especially when using a contrasting color.
ELEKTRYKA MOTOCYKLOWA
''- Chrome plated ABS housing - With regular bulb (incandescent bulb) - Red lens - ECE approved lens.
ELEKTRYKA MOTOCYKLOWA
Mikro tarcza, tylne światło LED. 30 mm Przezroczysta soczewka
''- Clear lens 30mm diameter- Round - ECE approved - M6 x 16mm long mounting bolt on rear - No license plate illumination - Suitable for custom applications - Approx. dimensions 30mm diameter x 14mm deep
ELEKTRYKA MOTOCYKLOWA
''- Smoke lens 30mm diameter- Round - ECE approved - M6 x 16mm long mounting bolt on rear - No license plate illumination - Suitable for custom applications - Approx. dimensions 30mm diameter x 14mm deep
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
Used to route 5/16" and 3/8" fuel and oil hoses. Eyelet inside diameter 1.5cm.
UKŁAD WYDECHOWY
Black universal middle clamp; made from steel; with an 1-5/8" (4.1cm) inside diameter and without mount strip.
LUSTERKA MANETKI OSPRZĘT
Lusterko w stylu późnego OEM, krótki wspornik, prawa strona. Chrom
With the late one-piece mirror stem style; like used on various 82-up H-D models. OEM style replacement for 91875-82
LUSTERKA MANETKI OSPRZĘT
Lusterko w stylu późnego OEM, krótki wspornik, prawa strona. Czarny
With the late one-piece mirror stem style; like used on various 82-up H-D models.
LUSTERKA MANETKI OSPRZĘT
Chrome plated steel. Dimpled. Approx. dimensions: 33" (83.8cm) wide x 4.25" (10.8cm) pullback x 1.5" (3.8cm) rise x 8" (20.3cm) center width
LUSTERKA MANETKI OSPRZĘT
Chrome plated steel. Dimpled. Approx. dimensions: 36.75" (93cm) wide x 6.75" (17cm) rise x 12" (30.5cm) pullback x 12" (30.5cm) center width
LUSTERKA MANETKI OSPRZĘT
Chrome plated steel. Dimpled. Approx. dimensions: 26.5" (67.3cm) wide x 5.5" (14cm) pullback x 0" rise x 8" (20.3cm) center width.
LUSTERKA MANETKI OSPRZĘT
Chrome plated steel. Dimpled. Approx. dimensions: 34" (86.4cm) wide x 7.5" (19cm) high x 7.5" (19cm) pullback x 8" (20.3cm) center width
LUSTERKA MANETKI OSPRZĘT
Black finished steel. Thinner 1" (25.4mm) diameter where controls and risers are mounted. Drilled for internal wiring. Approx. dimensions: 11" (28cm) rise x 33.75" (85.7cm) wide x 10" (25.4cm) center x 11" (28cm) pullback
LUSTERKA MANETKI OSPRZĘT
Black finished steel. Thinner 1" (25.4mm) diameter where controls and risers are mounted. Drilled for internal wiring. Approx. dimensions: 14" (35.6cm) rise x 33.75" (85.7cm) wide x 10" (25.4cm) center x 11" (28cm) pullback
LUSTERKA MANETKI OSPRZĘT
Black finished steel. Thinner 1" (25.4mm) diameter where controls and risers are mounted. Drilled for internal wiring. Approx. dimensions: 19" (48.3cm) rise x 33.75" (85.7cm) wide x 10" (25.4cm) center x 11" (28cm) pullback
LUSTERKA MANETKI OSPRZĘT
Left or right side use. 3/16-24 threaded stem.
LUSTERKA MANETKI OSPRZĘT
Chrome plated steel. Dimpled. Extra fat handlebar with thinner 1" diameter where controls and risers are mounted. Approx. dimensions: 35.25" (89cm) wide x 5.50" (14cm) pullback.
LUSTERKA MANETKI OSPRZĘT
Die-cast aluminum head with steel stem. Fits left & right side. This is a classic favorite for many chopper riders. Good looks; small and very affordable. Mirror head dimensions 114mm wide x 57mm high.
LUSTERKA MANETKI OSPRZĘT
Fits left or right side. Die-cast aluminum construction. 16cm stem length.
LUSTERKA MANETKI OSPRZĘT
Used on FLHR and FLHRC Road King models when installing apehanger handelbars. This cover hides the wires that exit the handlebars. Gives that clean; finished look. OEM replacement reference 55854-07 (chrome version).
LUSTERKA MANETKI OSPRZĘT
High efficiency clutch cable. This Motorcycle Storehouse control cable comes in a full black-out finish; with a black vinyl cable and black fittings. Oversize or undersize lengths (longer/shorter than standard) is not given since many different standard lengths exist. Instead they are available in a range of custom lengths to best suit your stock or custom application. Note: Dimensions as given are outer cable length; which includes the adjuster placed at 25-7/16" (64.5cm) from the bottom of the cable. Note: Fits M8 models but comes with 06-16 early style manual screw-type adjuster. Note: Will not fit models with sidecars or hydraulic master cylinders. Note: Just measure the required length. Make sure to turn the handlebar to a full left & right stop; before you determine the correct length for your application. Note: Lengths mentioned are approximate and for reference only.
LUSTERKA MANETKI OSPRZĘT
High efficiency clutch cable. This Motorcycle Storehouse control cable comes in a full black-out finish; with a black vinyl cable and black fittings. Oversize or undersize lengths (longer/shorter than standard) is not given since many different standard lengths exist. Instead they are available in a range of custom lengths to best suit your stock or custom application. Note: Dimensions as given are outer cable length; which includes the adjuster placed at 25-7/16" (64.5cm) from the bottom of the cable. Note: Fits M8 models but comes with 06-16 early style manual screw-type adjuster. Note: Will not fit models with sidecars or hydraulic master cylinders. Note: Just measure the required length. Make sure to turn the handlebar to a full left & right stop; before you determine the correct length for your application. Note: Lengths mentioned are approximate and for reference only.
LUSTERKA MANETKI OSPRZĘT
High efficiency clutch cable. This Motorcycle Storehouse control cable comes in a full black-out finish; with a black vinyl cable and black fittings. Oversize or undersize lengths (longer/shorter than standard) is not given since many different standard lengths exist. Instead they are available in a range of custom lengths to best suit your stock or custom application. Note: Dimensions as given are outer cable length; which includes the adjuster placed at 25-7/16" (64.5cm) from the bottom of the cable. Note: Fits M8 models but comes with 06-16 early style manual screw-type adjuster. Note: Will not fit models with sidecars or hydraulic master cylinders. Note: Just measure the required length. Make sure to turn the handlebar to a full left & right stop; before you determine the correct length for your application. Note: Lengths mentioned are approximate and for reference only.
LUSTERKA MANETKI OSPRZĘT
High efficiency clutch cable. This Motorcycle Storehouse control cable comes in a full black-out finish; with a black vinyl cable and black fittings. Oversize or undersize lengths (longer/shorter than standard) is not given since many different standard lengths exist. Instead they are available in a range of custom lengths to best suit your stock or custom application. Note: Dimensions as given are outer cable length; which includes the adjuster placed at 25-7/16" (64.5cm) from the bottom of the cable. Note: Fits M8 models but comes with 06-16 early style manual screw-type adjuster. Note: Will not fit models with sidecars or hydraulic master cylinders. Note: Just measure the required length. Make sure to turn the handlebar to a full left & right stop; before you determine the correct length for your application. Note: Lengths mentioned are approximate and for reference only.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE