-
×
STEEL PLATE KIT KTM/HVA
1 × 110,70 € -
×
HUB CLUTCH CR125 86-99
1 × 58,29 €
-
×
ŚRUBA SZEŚCIOKĄTNA M6 X 60 MM, OCYNK
1 × 8,07 €
SIEDZENIA KUFRY BAGAŻ
413,56 € z VAT
10.75" wide. Foam; with basket weave style upholstery. The Bare Bones solo seats are designed to look as thin and narrow as possible; even lower than the Silhouette solo. This gives an unbelievably sleek; low profile. Will complement the lines of every bike from stock factory to radical custom.
SIEDZENIA KUFRY BAGAŻ
413,56 € z VAT
11.5" wide. Foam; with basket weave style upholstery. The Bare Bones solo seats are designed to look as thin and narrow as possible; even lower than the Silhouette solo. This gives an unbelievably sleek; low profile. Will complement the lines of every bike from stock factory to radical custom.
SIEDZENIA KUFRY BAGAŻ
413,56 € z VAT
11.5" wide. Foam; with basket weave style upholstery. The Bare Bones solo seats are designed to look as thin and narrow as possible; even lower than the Silhouette solo. This gives an unbelievably sleek; low profile. Will complement the lines of every bike from stock factory to radical custom.
SIEDZENIA KUFRY BAGAŻ
258,08 € z VAT
9" extra wide. Foam. Compatible with Bare Bones solo seats.
SIEDZENIA KUFRY BAGAŻ
228,77 € z VAT
7.5" wide. Foam; with basket weave style upholstery. Compatible with Bare Bones and Bare Bones Up Front solo seats.
SIEDZENIA KUFRY BAGAŻ
258,08 € z VAT
9" extra wide. Foam; with basket weave style upholstery. Compatible with Bare Bones and Bare Bones Up Front solo seats.
SIEDZENIA KUFRY BAGAŻ
442,34 € z VAT
11" wide. Foam. This Up-Front version moves you 2.5" closer to the handlebars; when compared to the standard Bare Bones solo seat. the seat height is lowered for better control. A definite advantage for shorter riders. The Bare Bones solo seats are designed to look as thin and narrow as possible; even lower than the Silhouette solo. This gives an unbelievably sleek; low profile. Will complement the lines of every bike from stock factory to radical custom. Note: 00-17 Softail seats come in three versions. 00-07 with tires up to 150mm; with frame mounted seats. The 08-17 models; with tires up to 150mm and 06-17 200mm Wide Tire models with fender mounted seats. These are not interchangeable.
Brak w magazynie
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
195,50 € z VAT
Chrome; 3/8 NPT threaded; 5/16 (8mm) fuel hose; rear outlet. Note: This petcock has a rear outlet. If you rotate the complete ''rear outlet'' petcock 90 degrees; you can make the outlet point to the left or right and are still able to control the fuel valve handle. This makes a pretty universal set-up for future gas tanks where petcock location may be different. If you need a petcock that is made without compromises; you''ll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don''t need a high flow petcock... think again. With a regular petcock; when traveling at high speed; even with a stock engine; it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry; literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
OWIEWKI SZYBY
392,51 € z VAT
Clear hard coated Lexanr 4mm polycarbonate. Appropriate mounting kit must be ordered separately; except for FLHS models which can re-use OEM mount brackets. For 87-93 FLHS models it is advised you order lower adjustable window style C separately for better fitment around the headlamp
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
15,63 € z VAT
OEM replacement reference 63796-77A.
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
16,85 € z VAT
With 5-micron filtering media. Note: This filter is no longer advised for M8 models as of 2020. The Factory introduced a new filter; with a larger (elongated) body; and added 25% filtering media surface area to better support the higher oil flow in M8 models. For MCS M8 oil filters see 920966 chrome; 920967 black; 920968 chrome with top nut and 920969 for black with top nut.
Brak w magazynie
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
10,84 € z VAT
OEM replacement reference 63806-00Y
SIEDZENIA KUFRY BAGAŻ
648,32 € z VAT
Foam. Rider seat 12.5" wide; passenger seat 6.5" wide. Back to the roots with this modern version of the classic King & Queen seat with a touch of chopper mixed in. More comfort than you might expect at first glance. The high arched back for the rider provides great lower back support; great for racking up the miles effortlessly.
ZAWIESZENIE
9,58 € z VAT
Button head. Includes screws; copper sealing washers and hex key. Used in lower section of fork slider to drain the oil.OEM replacement reference 46201-52
Brak w magazynie
ZAWIESZENIE
9,09 € z VAT
Chrome Allen head. Includes screws; copper sealing washers and hex key. Used in lower section of fork slider to drain the oil.OEM replacement reference 45858-77
ZAWIESZENIE
38,40 € z VAT
Mounts swingarm pivot cap covers to frame.
199,91 € z VAT
1.870" cast iron
SIEDZENIA KUFRY BAGAŻ
19,67 € z VAT
OEM style replacement seat post slider bushing. Fits inside frame tube on H-Dr models that are equipped with a (solo seat) plunger assembly. OEM replacement reference 3113-29.
Brak w magazynie
9,51 € z VAT
Incl. 1 ceramic ball bearing. For 1" (25.4mm) axle diameters. Dimensions: 1" ID X 52mm OD X 15mm deep
402,23 € z VAT
Polished forged aluminum. No brake fluid sightglass. Hydraulic brake handlebar master cylinder with 14mm piston for 1" diameter handlebars.
402,23 € z VAT
Satin finished forged aluminum. No brake fluid sightglass. Hydraulic brake handlebar master cylinder with 14mm piston for 1" diameter handlebars.
379,89 € z VAT
Raw finished forged aluminum. No brake fluid sightglass. Hydraulic brake handlebar master cylinder with 14mm piston for 1" diameter handlebars.
469,27 € z VAT
Black anodized forged aluminum. No brake fluid sightglass. Hydraulic brake handlebar master cylinder with 14mm piston for 1" diameter handlebars.
ZAWIESZENIE
172,56 € z VAT
Bolt-on lowering kit for Touring models. Lowers the rear side of the bike 1 to 1. 5 inch by moving the lower shock mounts lower and further backwards. Designed to be used with stock air shocks. Wheel travel remains identical to stock. No permanent modifications are required.
ZAWIESZENIE
172,56 € z VAT
Bolt-on lowering kit for Touring models. Lowers the rear side of the bike 1 to 1. 5 inch by moving the lower shock mounts lower and further backwards. Designed to be used with stock air shocks. Wheel travel remains identical to stock. No permanent modifications are required. Note 1: 85-92 models may require modification to saddlebag mount for sufficient clearance.
ZAWIESZENIE
183,96 € z VAT
Bolt-on lowering kit for Touring models. Lowers the rear side of the bike 1 to 1. 5 inch by moving the lower shock mounts lower and further backwards. Designed to be used with stock air shocks. Wheel travel remains identical to stock. No permanent modifications are required. Note 1: 85-92 models may require modification to saddlebag mount for sufficient clearance.
ZAWIESZENIE
131,18 € z VAT
Plain finish. Non-adjustable. Lowers approx. 1 inch. Comes with a sealed bearing design; and allows installation without cutting; drilling or welding. No permanent modifications needed.
SIEDZENIA KUFRY BAGAŻ
813,92 € z VAT
With gel seat. This Burly Brand seat is called a ''Tail Section'' since the seat is not; like most; installed on the stock rear fender. For installation of this seat/cowl combination the stock large fender is removed. This opens-up the rear of the bike bringing out the maximum in classic cafe racer styling in a way no other ''ready to install'' seat could ever do. Comes with a black gel coated cowl. Instant magic for Sportsters! Note: Requires removal of stock rear fender; supporting struts and relocation of taillight and turn signals.
SIEDZENIA KUFRY BAGAŻ
813,92 € z VAT
With gel seat. This Burly Brand seat is called a ''Tail Section'' since the seat is not; like most; installed on the stock rear fender. For installation of this seat/cowl combination the stock large fender is removed. This opens-up the rear of the bike bringing out the maximum in classic cafe racer styling in a way no other ''ready to install'' seat could ever do. Comes with a fully vinyl covered seat/cowl. Instant magic for Sportsters! Note: Requires removal of stock rear fender; supporting struts and relocation of taillight and turn signals.
SIEDZENIA KUFRY BAGAŻ
782,61 € z VAT
With gel seat. This Burly Brand seat is called a ''Tail Section'' since the seat is not; like most; installed on the stock rear fender. For installation of this seat/cowl combination the stock large fender is removed. This opens-up the rear of the bike bringing out the maximum in classic cafe racer styling in a way no other ''ready to install'' seat could ever do. Comes with a black gel coated cowl. Instant magic for Sportsters! Note: Requires removal of stock rear fender; supporting struts and relocation of taillight and turn signals.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE