UKŁAD WYDECHOWY
Un-baffled 1-3/4" diameter. Fits electric start & custom kickstart applications. Includes mounting brackets and hardware. Heatshield front 902387; rear 903499. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
With Goose Cut muffler ends. Slider channels. Includes 718I4 and 718H10 mounting brackets. Heatshield front 902387; rear 903494. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Slider channels. Incl. two mounting brackets. Heatshield front 902387; rear 903494. Optional hanger bracket rear: 948457. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
Slider channels. Incl. mounting brackets and hardware. Heatshield front 902387; rear 903494
UKŁAD WYDECHOWY
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. With S-styleled rear pipe; routed under transmission. Incl. Paughco 731SB12 mounting plate with required hardware. Rear pipe under transm; slider channel on rear pipe; incl. 718H4 & 731SB7 hardware. Heatshield front 903483; rear 903491. Note: Incl. O2 sensor bungs. Bung plugs are included for86-06 models not equipped with O2 sensors. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Un-baffled 1-3/4" diameter. Fits electric start & custom kickstart applications. Includes mounting brackets and hardware. Heatshield front 903483; rear 903491. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
These pipes come un-baffled and in a 1 3/4" diameter. Unbeatable classic chopper design. Incl. Paughco 718H2 and 731SB3 hanger brackets. Heatshield front 903483; rear 903498. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Slider channels. Incl. 500191 hanger bracket. Heatshield front 902387; rear 903499. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Incl. 902839 brake stop / exhaust mount hanger bracket. Heatshield front 902808; rear 903652. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Slider channel on front pipe. Incl. Paughco 731SB10 mounting bracket. Note: heatshields are not mentioned are not available.
UKŁAD WYDECHOWY
Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Rigid frame. Use 506473 & 512595 clamps to mount. Heatshield front 903469; rear 903653. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Un-baffled and 1-3/4" diameter. Includes Paughco 718-7 hanger bracket. Heatshield front 902808; rear 903409. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
Un-baffled 1-3/4" diameter. Fits electric start & custom kickstart applications. Includes mounting brackets and hardware. Heatshield front 902387; rear 903499. Note: Heatshields must be ordered separately when required.
FILTR PALIWA/OLEJU ZBIORNIK PALIWA
3.0 gallon (11.3 liter). Single cap. Takes a pre-83 bajonet style vented gas cap and pre-75 3/8 NPT petcock. Approx. dimensions: Tank length 16«"; tank width 12"; tank depth 7"; tunnel length 16«"; tunnel depth 2¬"; tunnel width 2¬"; hole to hole on mount bracket 16-9/16". Note: It is advised to pressure test; seal and test fit all tanks before tanks are painted and installed. Some tanks are painted; but this coat is applied for rust prevention during storage only.
UKŁAD WYDECHOWY
Rear. OEM style replacement. 2-1/2" diameter x 17" long. Note: See 902226 for front muffler.
UKŁAD WYDECHOWY
Rear. OEM style replacement. 3" diameter x 18" long. Note: See 902231 for front muffler.
UKŁAD WYDECHOWY
Front or rear. OEM style replacement. 3" diameter x 18" long. Installs as a direct replacement to the OEM mounting points.
UKŁAD WYDECHOWY
Front or rear. OEM style replacement. 3" diameter x 18" long. Installs as a direct replacement to the OEM mounting points.
UKŁAD WYDECHOWY
Front. OEM style replacement. 2-1/2" diameter x 22" long. Will bolt to the stock H-D mounting brackets. Note: See 902262 for rear.
UKŁAD WYDECHOWY
Rear. OEM style replacement. 2-1/2" diameter x 22" long. Will bolt to the stock H-D mounting brackets. Note: See 902261 for front.
UKŁAD WYDECHOWY
3" diameter universal cruiser type muffler. Can be used as Turn Down by rotating muffler. Requires 3" diameter mount bracket. Note: See 999148 for 3" P clamp bracket for 58-84 or universal use. See 902640 bracket for 80-84 FLT models.
Custom oval chrome heatshield. Dimensions: 3.1" high x 5.5" long. Incl. mounting clamps.
Custom smooth steel heatshield. For 1-3/4" diameter pipes. Incl. mounting clamps.
UKŁAD WYDECHOWY
Paughco, prosta osłona termiczna / osłona bagażnika. 12″. Chrom
Custom smooth steel heatshield. For 1-3/4" diameter pipes. Incl. mounting clamps.
UKŁAD WYDECHOWY
Paughco, prosta osłona termiczna / osłona bagażnika. 14″. Chrom
Custom smooth steel heatshield. For 1-3/4" diameter pipes. Incl. mounting clamps.
UKŁAD WYDECHOWY
Paughco, prosta osłona termiczna / osłona bagażnika. 16″. Chrom
Custom smooth steel heatshield. For 1-3/4" diameter pipes. Incl. mounting clamps.
UKŁAD WYDECHOWY
Paughco, prosta osłona termiczna / osłona bagażnika. 18″. Chrom
Custom smooth steel heatshield. For 1-3/4" diameter pipes. Incl. mounting clamps.
UKŁAD WYDECHOWY
Slip-on Fishtail extensions with 1 3/4" inlet and 1 7/8" diameter. Not baffled.
Chrome. A custom slimmed down Slip-on Fishtail extensions with 1 3/4" inlet and 1 7/8" diameter. Not baffled.
UKŁAD WYDECHOWY
Fits standard 1 3/4" head pipes and installs with a 1 7/8" O.D. diameter clamp. No slider channels and not baffled.
Fits standard 1 3/4" head pipes and installs with a 1 7/8" O.D. diameter clamp. No slider channels and not baffled.
UKŁAD WYDECHOWY
Paughco, uniwersalny tłumik Fishtail. Długość 22-1/2″. Prawy
Chrome. Comes with left side slider channel mount; mounts to right side on bike. 1-3/4" inlet x 2-1/2" diameter x 22-1/2" long. Use 1-7/8" clamp to mount to 1-3/4" headers.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE