.490" valve lift. Set includes two chain driven camshafts. A cam drive installation kit; that includes a gear cover gasket; cam bearings and retaining ring can be ordered separately as S&S (531691) or Andrews (503421). Cams can be run with stock hydraulic lifters. Bolt-in. 96-103 inch with stock compression ratio. Great for two-up touring; this cam will add torque and HP at lower and middle RPM ranges. (1800-5200 RPM).
.510" valve lift. Set includes two chain driven camshafts. A cam drive installation kit; that includes a gear cover gasket; cam bearings and retaining ring can be ordered separately as S&S (531691) or Andrews (503421). Cams can be run with stock hydraulic lifters. 96 inch engines. 9.5 to 9.8 CR with stock heads. Torque and horsepower at mid to high RPM. Stock springs OK. 2400-6000 RPM.
.490" valve lift. Can be used with stock and modified 883; 1100 and 1200 Sportster engines. Slightly higher idle. Stock springs and lifters. 2000-6000 RPM powerband.
.490" int. & .500" exh. valve lift. Modified 1100-1200 and stroked 883. Suitable for stock springs and lifters. Good midrange power. 2000-6500 RPM. Headwork necessary.
SILNIK
Opis: Informacje dodatkowe:ANDREWS L: 250.000 W: 175.000 H: 80.000Sprzedawane jako: ST
SILNIK
Opis: Informacje dodatkowe:ANDREWS L: 250.000 W: 175.000 H: 75.000Sprzedawane jako: ST
SILNIK
Opis: Informacje dodatkowe:ANDREWS L: 230.000 W: 50.000 H: 10.000Sprzedawane jako: ST
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE