Standard replacement wrist pin for KB Twin Cam pistons. Note: See 944734 for matching KB wrist pin lock ring.
Standard replacement wrist pin for KB pistons. Note: See 944734 for matching KB wrist pin lock ring.
Forged Super Duty series for the Milwaukee Eight engine. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 114/117" M8 engines; cylinder must be bored to 4.125" big bore size. Case boring is not required; OEM weight so rebalancing is not required and works with stock 4.500" stroke. 10.9:1 CR. (with 88.6cc head volume). Piston weight: OEM. Piston pin weight 115gr.; offset: 0.025". Piston: +1.9cc/Flat top. Compression height: 1.083". Ring pack: 1.2mm 1.2mm 3.0mm. Bore 4 1/8" / Stroke stock 4.500".
Forged Super Duty series for the Milwaukee Eight engine. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 114/117" M8 engines; cylinder must be bored to 4.125" big bore size. Case boring is not required; OEM weight so rebalancing is not required and works with stock 4.500" stroke. 10.9:1 CR. (with 88.6cc head volume). Piston weight: OEM. Piston pin weight 115gr.; offset: 0.025". Piston: +1.9cc/Flat top. Compression height: 1.083". Ring pack: 1.2mm 1.2mm 3.0mm. Bore 4 1/8" / Stroke stock 4.500".
Forged Super Duty series for the Milwaukee Eight engine. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 114/117" M8 engines; cylinder must be bored to 4.125" big bore size. Case boring is not required; OEM weight so rebalancing is not required and works with stock 4.500" stroke. 10.9:1 CR. (with 88.6cc head volume). Piston weight: OEM. Piston pin weight 115gr.; offset: 0.025". Piston: +1.9cc/Flat top. Compression height: 1.083". Ring pack: 1.2mm 1.2mm 3.0mm. Bore 4 1/8" / Stroke stock 4.500".
Forged Super Duty series for the Milwaukee Eight engine. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 114/117" M8 engines; cylinder must be bored to 4.125" big bore size. Case boring is not required; OEM weight so rebalancing is not required and works with stock 4.500" stroke. 10.9:1 CR. (with 88.6cc head volume). Piston weight: OEM. Piston pin weight 115gr.; offset: 0.025". Piston: +1.9cc/Flat top. Compression height: 1.083". Ring pack: 1.2mm 1.2mm 3.0mm. Bore 4 1/8" / Stroke stock 4.500".
Forged Super Duty series for the Milwaukee Eight engine. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 107" M8 engines. Works with stock 4.375" stroke and stock unmodified heads. Aftermarket 4.25" bore cylinders are required. - 11.4:1 CR - Piston weight: OEM - Engine displacement: 124" - Bore: 4.25" - Stroke: 4.375" (stock 107" engine) - Ring pack: 1.5mm; 1.5mm; 3.0mm - Top land: .230 - Pin number: .9270x2.250x.180-SCR415H - Pin type: Floating - Pin diameter: .927" - Compression height: 1.155" - Crown Type: Dome - Crown (cc): -2cc - Alloy: Forged 4032 Alloy
Forged Super Duty series for the Milwaukee Eight 114" and 117" engine for a 128" big bore conversion. Designed to work with both oil/water cooled engines and up to 3mm larger valves. With hard anodized crown and top ring groove to reflect heat and prevent ring to groove ''micro-welding''. The Line2Line abradable self-lubricating powder coating technique allows zero tolerance installation; final tolerance will be 0.003". The piston creates its own perfect tolerance during run-in; the coating automatically gives the tightest possible & perfect piston to cylinder fit for no piston rock and best possible ring seal. Note: Fits 114/117" M8 engines with stock 4.5" stroke. Aftermarket 4.25" bore cylinders are required. For up to 3mm larger valves. - Compression ratio: 11.7:1 - Engine displacement: 128" - Bore: 4.25" - Stroke: 4.5" - Ring Pack: 1.5mm; 1.5mm; 3.0mm - Top land: 0.23 - Pin Number: .927x2.250x.180c-SCR415H - Pin type: Floating - Pin Diameter: 0.927" - Lock: BR8894-1 - Compression height: 1.083" - Crown type: Dome - Crown (cc): -2.5 - Alloy: Forged 4032 alloy
High compression. 883-1200 conversion piston set. Compatible with stock unmodified cylinder heads. 10:1 Compression ratio. Piston weight 335gr. Piston pin diameter .792" and weight 97gr. Head type: Dish. Dome +10cc. Compression height 1.210". Bore 3.498". Stroke 3.812". Rod length 6.926". Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: 1200cc cylinders must be purchased for 04-up 883 XL models. Stock cylinders liners of 04-up XL models are too thin to bore to 1200 size.
High compression. 883-1200 conversion piston set. Compatible with stock unmodified cylinder heads. 10:1 Compression ratio. Piston weight 335gr. Piston pin diameter .792" and weight 97gr. Head type: Dish. Dome +10cc. Compression height 1.210". Bore 3.498". Stroke 3.812". Rod length 6.926". Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: 1200cc cylinders must be purchased for 04-up 883 XL models. Stock cylinders liners of 04-up XL models are too thin to bore to 1200 size.
High compression. 883-1200 conversion piston set. Compatible with stock unmodified cylinder heads. 10:1 Compression ratio. Piston weight 335gr. Piston pin diameter .792" and weight 97gr. Head type: Dish. Dome +10cc. Compression height 1.210". Bore 3.498". Stroke 3.812". Rod length 6.926". Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: 1200cc cylinders must be purchased for 04-up 883 XL models. Stock cylinders liners of 04-up XL models are too thin to bore to 1200 size.
Standard replacement piston set for stock applications. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Standard replacement piston set for stock applications. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Standard replacement piston set for stock applications. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Standard replacement piston set; for stock or high lift camshafts. With a lowered top ring and deeper valve pockets to accomodate the higher lift cams. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Standard replacement piston set; for stock or high lift camshafts. With a lowered top ring and deeper valve pockets to accomodate the higher lift cams. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Standard replacement piston set; for stock or high lift camshafts. With a lowered top ring and deeper valve pockets to accomodate the higher lift cams. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.
8.0:1 CR. Piston weight 357gr. Piston pin weight 97gr. Head type: Dome 0.426" / Dome -30cc. Compression height 1.285". / Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
8.0:1 CR. Piston weight 357gr. Piston pin weight 97gr. Head type: Dome 0.426" / Dome -30cc. Compression height 1.285". / Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
8.0:1 CR. Piston weight 357gr. Piston pin weight 97gr. Head type: Dome 0.426" / Dome -30cc. Compression height 1.285". / Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T7 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE