15,45  z VAT

Chrome plated universal middle clamp; made from steel; with an 1-1/2" (3.8cm) inside diameter and without mount strip.

10,79  z VAT

Chrome plated universal middle clamp; made from steel; with an 1-5/8" (4.1cm) inside diameter and without mount strip.

10,57  z VAT

Chrome plated universal middle clamp; made from steel; with an 1-3/4" (4.4cm) inside diameter and without mount strip.

17,98  z VAT

Chrome plated universal middle clamp; made from steel; with an 2" (5.1cm) inside diameter and without mount strip.

+
Brak w magazynie
45,36  z VAT

12" (30.5cm) x 24" (61cm). Blocks up to 90% radiant heat of up to 2000řF (1093řC) and 300Fř (149řC) direct heat. Manufactured from woven silica with a flexible aluminized finish and a self-adhesive adhesive strong composite backing. Easy to use and trim to fit. Perfect for use on painted or plastic parts and easily wraps around wiring or hoses.

42,34  z VAT

3/4" (19mm) diameter x 36" (91cm) long. Used to guide wiring or oil and fuel lines and protect from abrasion and direct heat up to 750Fř (400řC). Sleeving can be pre-formed for individual applications.

46,53  z VAT

1" (25.4mm) diameter x 36" (91cm) long. Used to guide wiring or oil and fuel lines and protect from abrasion and direct heat up to 750Fř (400řC). Sleeving can be pre-formed for individual applications.

+
Brak w magazynie
10,79  z VAT

Black universal middle clamp; made from steel; with an 1-5/8" (4.1cm) inside diameter and without mount strip.

8,73  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 8" (20.3 cm) long; made from zinc plated steel. Fits 1 3/4" (4.4 cm) outside diameter header pipes. Installs with included bolt.

9,98  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 8" (20.3 cm) long; made from zinc plated steel. Fits 2" (5.1 cm) outside diameter header pipes. Installs with included bolt.

7,26  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 4" (10.2 cm) long; made from zinc plated steel. Fits 1 1/2" (3.8 cm) outside diameter header pipes of 750cc (45") Flatheads. Installs with included bolt.

25,50  z VAT

Heat shield; 7" (17.8 cm) long; made from black steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

26,38  z VAT

Heat shield; 10" (25.4 cm) long; made from black steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

34,69  z VAT

Heat shield; 14" (35.6 cm) long; made from chromed steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

26,14  z VAT

Heat shield; 14" (35.6 cm) long; made from black steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

40,17  z VAT

Heat shield; 18" (45.7 cm) long; made from chromed steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

28,62  z VAT

Heat shield; 18" (45.7 cm) long; made from black steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

22,45  z VAT

Heat shield; 4" (10.2 cm) long; made from black steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

31,41  z VAT

Heat shield; 7" (17.8 cm) long; made from chromed steel. Comes complete with clamps and fits 2 1/4" (5.7 cm) diameter head pipes.

11,71  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 12" (30.5 cm) long; made from zinc plated steel. Fits 1 3/4" (4.4 cm) outside diameter header pipes. Installs with included bolt.

7,90  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 4" (10.2 cm) long; made from zinc plated steel. Fits 2" (5.1 cm) outside diameter header pipes. Installs with included bolt.

78,73  z VAT

Stainless. OEM style replacement. Used to mount exhaust to cylinder heads. Repl. 65273-88T; 65519-52C.

586,51  z VAT

Chrome. Left side use. 3" diameter x 32" long. With mount; no additional hanger brackets needed. Note: See 908719 for right side muffler.

1251,86  z VAT

Chrome. A classic 2 into 2 system with cutting edge features. 2 1/2" diameter; full length heat shields wrap 222ř around the exhaust pipe for a virtually no-blue experience and are finished with chrome billet tips. The power port connects both mufflers for best midrange and bottom end torque and does away with the need for a balance pipe between the two exhaust headers. Since head pipes are therefore not connected you get the clean and uncluttered look. The baffles are removable and give a great deep sound. Note: A quiet baffle is optionally available as 915522; a replacement baffle as 915525.

939,90  z VAT

Chrome. A classic 2 into 2 system with cutting edge features. 2 1/2" diameter; full length heat shields wrap 222ř around the exhaust pipe for a virtually no-blue experience and are finished with chrome billet tips. The power port connects both mufflers for best midrange and bottom end torque and does away with the need for a balance pipe between the two exhaust headers. Since head pipes are therefore not connected you get the clean and uncluttered look. The baffles are removable and give a great deep sound. Note: Pipes extend to the end of the saddlebags. Note: A quiet baffle is optionally available as 915522; a replacement baffle as 915550.

1251,86  z VAT

Chrome with chrome end caps. A classic Hot Rod 2 into 2 system with cutting edge features. Comes with full size 2 1/2" diameter; full length heat shields that wrap 222ř around the exhaust pipe. Complete with chrome plated billet tips. A special ''power port'' is used in both long and short Speedster exhaust pipes. The power port connects both mufflers for increased midrange and bottom end torque. Removable baffles give a great deep sound; with optional quiet baffles available. Note: See 915520 for the optional quiet baffle. Note: See 915523 for the standard replacement baffle.

1251,86  z VAT

Chrome. A classic 2 into 2 system with cutting edge features. 2 1/2" diameter; full length heat shields wrap 222ř around the exhaust pipe for a virtually no-blue experience and are finished with chrome billet tips. The power port connects both mufflers for best midrange and bottom end torque and does away with the need for a balance pipe between the two exhaust headers. Since head pipes are therefore not connected you get the clean and uncluttered look. The baffles are removable and give a great deep sound. Note: A quiet baffle is optionally available as 915522; a replacement baffle as 915525.

1237,61  z VAT

Chrome with chrome end caps. A classic Hot Rod 2 into 2 system with cutting edge features. Comes with full size 2 1/2" diameter; full length heat shields that wrap 222ř around the exhaust pipe. Complete with chrome plated billet tips. A special ''power port'' is used in both long and short Speedster exhaust pipes. The power port connects both mufflers for increased midrange and bottom end torque. Removable baffles give a great deep sound; with optional quiet baffles available. Note: See 915521 for the optional quiet baffle. Note: See 915524 for the standard replacement baffle.

780,46  z VAT

Chrome. Comes with a 4" diameter body that bells out to 4.5". These are perforated core slip-on mufflers that are; some say; too loud and nickname them ''Neighbor Haters''. But for the Loud Crowd these are the slip-ons that will truly bring life to the bike! The sound is loud & low and fully different from the shrill sound of drag pipes due to the 2" constant velocity baffle design with stainless mesh and high/density bonded fiberglass wrap. Note: Very loud.

926,45  z VAT

Slider channels. Heatshield front 902387; rear 903496. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Heatshields must be ordered separately when required.

975,35  z VAT

Slider channels. Mounts to stock 84-94 hanger bracket. Heatshield front 902387; rear 903499. Incl. 500191 mount bracket.

926,45  z VAT

Slider channels. Mounts to OEM hanger bracket up to 1992. Heatshield front 902387; rear 903496. Note: Heatshields must be ordered separately when required.