-
×
ŚRUBA IMBUSOWA M10 X 35 MM, NIERDZEWNA
1 × 79,95 zł
UKŁAD WYDECHOWY
Paughco, niestandardowy zacisk głowicy XL Sportster. Nierdzewny
334,56 zł z VAT
Stainless. OEM style replacement. Used to mount exhaust to cylinder heads. Repl. 65273-88T; 65519-52C.
UKŁAD WYDECHOWY
2 485,83 zł z VAT
Chrome. Left side use. 3" diameter x 32" long. With mount; no additional hanger brackets needed. Note: See 908719 for right side muffler.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Slider channels. Heatshield front 902387; rear 903496. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
4 132,80 zł z VAT
Slider channels. Mounts to stock 84-94 hanger bracket. Heatshield front 902387; rear 903499. Incl. 500191 mount bracket.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Slider channels. Mounts to OEM hanger bracket up to 1992. Heatshield front 902387; rear 903496. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 066,39 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Use 500191 Softail hanger bracket. Heatshield front 902387; rear 903499. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Incl. 902839 brake stop / exhaust mount bracket. Heatshield front 902808; rear 903652.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Rigid frame; kickstart; hydraulic brakes (excl. mechanical brakes); slider channels. Heatshield front 902658; rear 903403. Note: Not S-type. Front pipe routed below frame tube. Less ground clearance in right turns.
UKŁAD WYDECHOWY
4 132,80 zł z VAT
Swing frame;kickstart & e-start with FXE battery; slider channels. Heatshield front 902658; rear 903493. Incl. 514121 hanger bracket.
UKŁAD WYDECHOWY
4 563,30 zł z VAT
S-pipe; swingarm frame; kick & e-start; will not fit large FL battery; slider channels. Heatshield rear 903471. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. Note: Back in the day the ''S-pipe'' design was used by The Factory to improve ground clearance by routing the front header pipe between frame and generator; this required partially flattening the header. These systems may not fit custom frames.
Brak w magazynie
UKŁAD WYDECHOWY
4 132,80 zł z VAT
E-start only; slider channels. Incl. 506653 mount bracket. Heatshield front 902658; rear 903541. Incl. 506653 mount bracket. Note: Rear pipe routed under transmission. Less ground clearance in right turns.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Slider channels. Incl. Incl. 506472 hanger bracket. Order 506472 bracket and 506473 clamps separately. 902814 brake stop required on 80-85 XL models. Heatshield front 903469; rear 903473.
UKŁAD WYDECHOWY
4 132,80 zł z VAT
E-start only; slider channels. Incl. 506653 mount bracket. Heatshield front 902658; rear 903541. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Swingarm frame; kickstart; e-start with FXE battery; slider channels. Heatshield front 902658; rear 903404. Optional hanger bracket front: 948458. Optional hanger bracket rear: 948457. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
4 132,80 zł z VAT
Swingframe; kickstart; E-start with fxe battery; slider channels; incl 514121 bracket
Brak w magazynie
UKŁAD WYDECHOWY
4 132,80 zł z VAT
Swingarm frame; kickstart & e-start with FXE battery; slider channels. Incl. 514121 hanger bracket. Heatshield front 902658; rear 903493. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Slider channels. Incl. 506472 bracket. Order 506473 clamps separately. Heatshield front 903469; rear 903474. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Slider channels. Incl. 506472 bracket. Order 506473 clamps separately. Heatshield front 903469; rear 903474. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
OEM Shotgun style. Heatshield front 902387; rear 903494. O.E.M. style looks; but improved breathing and no ugly crossover tube.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Mountes to stock mounting brackets. Heatshield front 902387; rear 903494. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
E-start. Slider channels. Mounts to stock hanger bracket. Heatshield front 902658; rear 903538. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
E-start only. Slider channels. Bolts to stock hanger bracket. Heatshield front 902658; rear 903538. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
2 334,54 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Order 506472 bracket and 506473 clamps separately. 902814 brake stop required on 80-85 XL. Heatshield front 903469; rear 903473. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
2 624,82 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Slider channels. Bolts to stock hanger bracket. E-start only. Heatshield front 902658; rear 903538. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
2 334,54 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. E-start only. Order 506472 bracket and 506473 mount clamps separately. Heatshield front 903469; rear 903474. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
2 334,54 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Swingarm frames. Fit rigids when mechanical brake crossover tube is removed. Slider channels front & rear. Heatshield rear 903478. Note: This is not a 2-piece S-pipe system. Front pipe is routed below frame tube. Less ground clearance in right turns. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Order 506472 bracket and 506473 clamps separately. Heatshield front 903469; rear 903473. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: 902814 brake stop required on 80-85 XL models. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
Swingframe & rigids when mech brake crossover tube is removed; slider channels. Heatshield rear 903478. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Not S-type. Front pipe routed below frame tube. Less ground clearance in right turns. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
4 132,80 zł z VAT
Swing arm & rigids; slider channels. Not compatible with FL battery. Heatshield rear 902806. 1 3/4" diameter Tapered staggered dual exhaust system. O.E.M. style looks; but improved breathing and no ugly crossover tube. Note: Not S-type. Front pipe routed below frame tube. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
3 926,16 zł z VAT
E-start only. Slider channels. Heatshield front 902658; rear 903538.
UKŁAD WYDECHOWY
2 868,36 zł z VAT
S-pipe. Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Fits rigid and wingarm frames. Incl. Paughco 523-3 mount clamp. Slider channel on front & rear pipe. Will not fit with large FL battery. Heatshield rear 903471. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
2 624,82 zł z VAT
Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Kick & e-start. Right floorboard must be moved for pipe clearance; use 506654 bracket. Slider channels; use 506652 hanger bracket for easy installation. Heatshield front 902658; rear 903476. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Right floorboard must be moved for pipe clearance. Note: Heatshields must be ordered separately when required.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE