UKŁAD WYDECHOWY
S-pipe. 1 3/4" head pipes. Designed to be used with universal mufflers. Rigid frame only; kickstart. Use 512595 P-clamp to mount. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
Chrome. Rigid frame. Kickstart. 1-3/4" head pipes with a gooseneck end. The rear pipe first goes down; close over the transmission; before becoming upswept. Pipe will clear e-start wraparound oil tank. Heatshield rear 903399. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. Note: The S-pipe system has a 2-piece front header; like OEM; which is flattened to fit between engine and frame tube for improved ground clearance in right turns.
UKŁAD WYDECHOWY
Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725M clamp. Heatshield front 903577; rear 906459; right rear snail 903569. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
Chrome. 1-3/4" head pipes. If desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Swingarm frame. Kickstart. E-start with FXE (small) battery. Includes Paughco 718J (948457) and 718J2 (848480) rear hanger brackets. Optional heatshield rear 903472. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between engine and frame tube for improved ground clearance in right turns.
UKŁAD WYDECHOWY
Paughco, rury wydechowe upswept. Rura S – wokół zbiornika oleju
Chrome. 1-3/4" head pipes. If so desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Heatshield front 902387; rear 903397
UKŁAD WYDECHOWY
Incl. 3 brackets & one shift linkage. Heatshields: Left side crossover 903482; front header heat shield 902698; low front heat shield 933820 rear header heat shield 902699. Note: Order 2x 568736 Paughco hanger bracket separately. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
Chrome. A very distinctive old school custom slip-on muffler. 2-1/2" diameter with 1 3/4" inlet for stock head pipes. Note: Available in a right (908656) and left (908657) side version.
UKŁAD WYDECHOWY
Chrome. Comes with right side slider channel mount; mounts to left side on bike. 1-3/4" inlet x 2-1/2" diameter x 28" long.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE