Item with approval. Brake line from TRW. High quality manufacturing with a PTFE inner core and a braided stainless steel protective cover in black. This provides a highly flexible brake line with an outer diameter of just 7 mm with an excellent pump-up resistance. The perfect solution in virtually any stock or custom application where demands are extremely high. Note 1: Comes with pre-installed threaded brake line ends that may be rotated up to 180 degrees to compensate for the required installation angle; upon installation. If a 180 degree rotation is insufficient the line must be reinstalled or replaced. Note 2: Brake lines must be installed as described in the included installation manual. Note 3: Banjo fittings and brake line connectors are separately available to cover most stock and custom applications. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Item with approval. Brake line from TRW. High quality manufacturing with a PTFE inner core and a braided stainless steel protective cover in black. This provides a highly flexible brake line with an outer diameter of just 7 mm with an excellent pump-up resistance. The perfect solution in virtually any stock or custom application where demands are extremely high. Note 1: Comes with pre-installed threaded brake line ends that may be rotated up to 180 degrees to compensate for the required installation angle; upon installation. If a 180 degree rotation is insufficient the line must be reinstalled or replaced. Note 2: Brake lines must be installed as described in the included installation manual. Note 3: Banjo fittings and brake line connectors are separately available to cover most stock and custom applications. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Item with approval. Brake line from TRW. High quality manufacturing with a PTFE inner core and a braided stainless steel protective cover in black. This provides a highly flexible brake line with an outer diameter of just 7 mm with an excellent pump-up resistance. The perfect solution in virtually any stock or custom application where demands are extremely high. Note 1: Comes with pre-installed threaded brake line ends that may be rotated up to 180 degrees to compensate for the required installation angle; upon installation. If a 180 degree rotation is insufficient the line must be reinstalled or replaced. Note 2: Brake lines must be installed as described in the included installation manual. Note 3: Banjo fittings and brake line connectors are separately available to cover most stock and custom applications. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 11" / 27 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 19" / 48 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 20" / 50 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 26" / 66 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 32" / 81 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 37" / 94 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 43" / 109 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pre-fabricated brake line kit with approval. Designed for use in all custom and stock applications. Manufactured with chrome plated (female 3/8"-24 AN-3) hose ends. Excellent pressure resistance. Brake line nipples are sold separately. Note: Brake line length represents the brake line length from inverted flare hose end to inverted flare hose end; without adding the length of the hose end nipple. - Plain braided stainless steel. - 57" / 144 cm longNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.