High compression. 883-1200 conversion piston set. Compatible with stock unmodified cylinder heads. 10:1 Compression ratio. Piston weight 335gr. Piston pin diameter .792" and weight 97gr. Head type: Dish. Dome +10cc. Compression height 1.210". Bore 3.498". Stroke 3.812". Rod length 6.926". Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: 1200cc cylinders must be purchased for 04-up 883 XL models. Stock cylinders liners of 04-up XL models are too thin to bore to 1200 size.

Standard replacement piston set; for stock or high lift camshafts. With a lowered top ring and deeper valve pockets to accomodate the higher lift cams. Stock 9.0:1 compression ratio. Piston weight 341gr. Piston pin weight 97gr. Head type: Flat top / Dome +1.5cc. Compression height 1.210". Bore 3.498" / Stroke 3.812". Rod length 6.938" / Cyl. length 4.650". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.

Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.

Compatible with stock cylinders and heads; gives stock compression ratio. 8.5:1 CR. Piston weight 370gr. Piston pin weight 97gr. Head type: Dome 0.656" / Dome -57cc. Compression height 1.450". Bore 3.4375" / Stroke 3.969" (3-31/32"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.

8.0:1 CR. Piston weight 357gr. Piston pin weight 97gr. Head type: Dome 0.426" / Dome -30cc. Compression height 1.285". / Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.

High compression pop-up piston set. 9.5:1 CR. Piston weight 388gr. Piston pin weight 97gr. Head type: Dome / Dome -47cc. Compression height 1.285" / Bore 3.4980". Stroke 4.250". Rod length 7.440" / Cyl. length 5.330". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions. Note: Around 30% of stock 1340cc Shovel cylinders may present a problem in combination with the location of some of the oil return holes since KB pistons have a wider piston ring pack for better piston stability in the cylinder. In these cases the oil return hole must be re-located (lowered) to avoid excessive oil consumption.

8.5:1 CR. Piston weight 350gr. Piston pin weight 97gr. Head type: Flat top. Dome +1.5cc. Compression height 1.375". Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440". Cyl. length 5.550". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.

Pop-up high compression. 10.5:1 CR. Piston weight 360gr. Piston pin weight 97gr. Head type: Dome 0.200". Dome -18cc. Compression height 1.375". Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440". Cyl. length 5.550". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.

Pop-up high compression. 10.5:1 CR. Piston weight 360gr. Piston pin weight 97gr. Head type: Dome 0.200". Dome -18cc. Compression height 1.375". Bore 3.4980". Stroke 4.250" (4-1/4"). Rod length 7.440". Cyl. length 5.550". Comes with T6 heat treated 390 Hypereutectic cast pistons with 16% silicone levels which enables running a very tight clearance for longevity and hardly any piston noise. Note: Top compression ring will need additional clearance. See instructions.