1 581,78  z VAT

Cast aluminum OEM style pistons for a stock rebuild. Wil fit all 29-73 45" (750cc) Flathead models. Pistons include wrist pins; retainers and piston rings. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

1 630,98  z VAT

Cast aluminum OEM style pistons for a stock 1200cc Side Valve rebuild. Pistons include wrist pins; retainers & piston rings. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

119,31  z VAT

The studs mount to the excisting threaded hole in the upper part of the 84-99 Softail frame. Studs are 1/2-13 threaded.

323,49  z VAT

Polished plated aluminum. Comes complete with fork-to-bracket inserts to compensate for fork diameter. Used on headlamps with side mounts.

+
Brak w magazynie
1 876,98  z VAT

Chrome plated OEM style handlebar control kit; single disc models. Complete with switch housing and stock style switches and wiring.

RAMA NADWOZIE

ZESTAW PODSTAWEK JIFFY

447,72  z VAT

Complete kick stand / side stand kit. With ''flat bottom'' jiffy leg. All you need is a frame to mount this kit to. Fits as stock replacement and great in many stock & custom applications with stock and most custom frames. OEM replacement reference 50087-89A jiffy leg; 50018-85 jiffy leg holder bracket; 50015-74A leg stop; 50028-91 spring holder bracket; 50005-85A spring

51,66  z VAT

41mm fork tubes. Includes 45843-77 OEM style oil seals.

441,57  z VAT

3/4" (19.05cm) diameter x 38cm long. Designed for Softail style swingarms. Comes complete with billet tip end and Allen head (socket head cap) bolt for both sides of the axle. The billet tips are special machined for Softail axle adjuster bolts. Lengths mentioned are outside swing to outside swing.

204,18  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

194,34  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

199,26  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

154,98  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

167,28  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

182,04  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

138,99  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

164,82  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

177,12  z VAT

Used to extend the wiring harness when longer or wider than stock handlebars are installed. Note: Turn signal wiring extension kit must be separately purchased; when required.

+
Brak w magazynie

LUSTERKA MANETKI OSPRZĘT

CHROMOWANY ZESTAW KIEROWNICY

1 322,25  z VAT

11/16 INCH BORE

LUSTERKA MANETKI OSPRZĘT

Zestaw sterowania kierownicą chrom

2 452,62  z VAT

Chrome plated OEM style handlebar control kit. Complete with switch housing and radio switches and wiring.

72,57  z VAT

SKRZYNIA BIEGÓW SPRZĘGŁO

Zestaw rozruchowy, 5-biegowy. Chrom

1 675,26  z VAT

Chromed kick cover. Complete kit to give your 5-speed 82-93 Big Twin all the benefits of kickstart. Many of the old style 4-speed kickstart parts are used for easy access to replacement parts. This kit is ready to install and will fit 87-89 models without requiring any other parts; apart from a 87-89 style dipstick for 82-86 models. Note: May require exhaust modification. Note: When Installing this kit on a 82-86 model; or on a 90-99 models (excl. Twin Cam) see ''Conversion Parts'' list below. These parts must be ordered separately. Note: Transmission fill plug with dipstick; like Colony 989309 for 87-06 style 5-speeds; is not included must be ordered separately or re-used. 82-86 models - Conversion parts. You will need a later; 87-94 style; clutch cable and a later; 87-99 style; clutch release kit (ball and ramp). 570069 87-94 style cable for 82-86 FXR; FXRS; FXRT models. 570061 87-99 style cable for 82-86 Softail and FLT models; clutch cable. 555555 87-99 style clutch release kit for all 82-86 B.T. models. 90-99 models (excl. TC) - Conversion parts. You will need a old style clutch adjuster screw to fit the 5-speed kickstart kit. 517447 90-99 all models (excl. TC); old style clutch adjuster screw.

LUSTERKA MANETKI OSPRZĘT

ZESTAW OBUDOWY PRZEŁĄCZNIKA

1 089,78  z VAT

CHROME WITH CHROME SWITCHES WITH 60 INCH WIRING

LUSTERKA MANETKI OSPRZĘT

ZESTAW OBUDOWY PRZEŁĄCZNIKA

1 068,87  z VAT

BLACK WITH BLACK SWITCHES WITH 60 INCH WIRING

455,10  z VAT

Switch housing kit with wiring and installed switches. Black housing and switches

+
Brak w magazynie
1 068,87  z VAT

12-Volt. A true vintage Jubilee bugle reproduction style design electric horn kit as originally found on Panheads.

65,19  z VAT

FRONT BRAKE ROTOR; 5-PIECE KIT. Note: Check for right rotor clearance

OBEJMY ZŁĄCZKI ŚRUBY

CZARNE OSŁONY ŚRUB TORX 3/8

67,65  z VAT

Rear brake rotor; 5-piece kit

LUSTERKA MANETKI OSPRZĘT

Zestaw do sterowania kierownicą. Czarny

1 756,44  z VAT

Black OEM style handlebar control kit; 14mm dual disc (ABS). Complete with switch housing; without stock style switches and wiring.

803,19  z VAT

Universal mounts to fit 1-1/4" (32mm) tubing; like most engine guards. Takes all foot pegs styles with Traditional H-D male mount. OEM replacement reference 50830-07.

803,19  z VAT

Universal mounts to fit 1-1/4" (32mm) tubing; like most engine guards. Takes all foot pegs styles with Traditional H-D male mount.

78,72  z VAT

For 9/16" bore master cylinder. Includes piston & Viton / Buna O-rings.

LUSTERKA MANETKI OSPRZĘT

Zestaw sterowania kierownicą chrom

1 261,98  z VAT

Chrome plated OEM style handlebar control kit. Complete with switch housing; without stock style switches and wiring. For models with Radio