79,95  z VAT

Chrome steel replacement covers. OEM replacement reference 54708-88TA

666,66  z VAT

OEM style replacement chrome plated die-cast aluminum fender supports. OEM replacement reference 59950-89 and 59951-89

419,43  z VAT

Black. Fits all Tourings with traditional Batwing fairings. Smooth-out your handlebars by removing the handlebar mounted mirrors and install a set of these fairing integrated mirrors. A template is included for drilling the two holes required for installation.

413,28  z VAT

Black. Fits all Tourings with traditional Batwing fairings. Smooth-out your handlebars by removing the handlebar mounted mirrors and install a set of these fairing integrated mirrors. A template is included for drilling the two holes required for installation.

672,81  z VAT

- Rear - Single function - Smoke lens - Amber LED - ECE approved lens. Complete replacement for 86-up Touring models with stock large 3-1/4" flat lens turn signals. Comes pre-wired; without connectors. Turn signals for front and rear applications are the same; difference is in wiring for single/dual function. Note: In general EU models are not wired for dual function.

738,00  z VAT

- Rear - Single function - Smoke lens - Amber LED - ECE approved lens. Complete replacement for 86-up Touring models with stock large 3-1/4" flat lens turn signals. Comes pre-wired; without connectors. Turn signals for front and rear applications are the same; difference is in wiring for single/dual function. Note: In general EU models are not wired for dual function.

+
Brak w magazynie
286,59  z VAT

Stock replacement fork slider hydraulic damper tube assembly. OEM replacement reference 45857-83

548,58  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

554,73  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

626,07  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

649,44  z VAT

High-end CNC machined aluminum headlamp brackets. Width adjustable by rotating the brackets on the fork tubes to fit a variety of headlamp diameters. Two 10mm holes per bracket; one for the headlight and one for a turn signal. By using miniature LED turn signals you will have one of the cleanest turn signal mount solutions in the industry. Distance from fork tube clamp hole to headlamp mount hole 87mm; measured center to center of hole.

125,46  z VAT

41MM

127,92  z VAT

49MM FORKTUBES

127,92  z VAT

49MM FORKTUBES

182,04  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

222,63  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

163,59  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

234,93  z VAT

2-piece aluminum fork mount clamp for an easy install. Comes with 5/16-24 threaded bolt that is installed to the; un-threaded body; by a counter locking nut. Most 5/16-24 threaded turn signals or other accessories can be installed after which; due to the two-piece design; the clamp can be mounted to the fork tube without fork tube removal. Great for use with turn signals or auxiliary lights.

+
Brak w magazynie
138,99  z VAT

Stock replacement fork slider hydraulic damper tube assembly. OEM replacement reference 45925-88

1 761,36  z VAT

Reproduction of the early design of the OEM Softail fork sliders and will fit all Evo 84-99 Softail models with single (left front) caliper. Compatible with all 84-99 OEM Softail internals and brake components. Sold in pairs. OEM replacement reference 45917-86 and 45916-86

439,11  z VAT

Stock replacement fork slider hydraulic damper tube assembly. OEM replacement reference 45925-97

LUSTERKA MANETKI OSPRZĘT

Zestaw chwytów kierownicy, Shell Shock

884,37  z VAT

Chrome plated aluminum. Black rubber inlay with chrome flames.

LUSTERKA MANETKI OSPRZĘT

Chwyty 7/8″ w stylu vintage, czarne

35,67  z VAT

Styled after the 1909 handlebar grips. The perfect rubber grip for that ice cool retro bike. Note: A throttle sleeve is not included and must be re-used or purchased separately.

LUSTERKA MANETKI OSPRZĘT

Uchwyty 7/8″ w stylu vintage białe

30,75  z VAT

Styled after the 1909 handlebar grips. The perfect rubber grip for that ice cool retro bike. Note: A throttle sleeve is not included and must be re-used or purchased separately.

LUSTERKA MANETKI OSPRZĘT

Uchwyty 7/8″ w stylu vintage czerwone

34,44  z VAT

Styled after the 1909 handlebar grips. The perfect rubber grip for that ice cool retro bike. Note: A throttle sleeve is not included and must be re-used or purchased separately.

31,98  z VAT

Styled after the 1909 handlebar grips. The perfect rubber grip for that ice cool retro bike. Note: A throttle sleeve is not included and must be re-used or purchased separately.

30,75  z VAT

Styled after the 1909 handlebar grips. The perfect rubber grip for that ice cool retro bike. Note: A throttle sleeve is not included and must be re-used or purchased separately.

44,28  z VAT

With a big flange. Rubber grips with the classic barrel shape that was popular; way back when. A perfect solution to keep in touch with motorcycle heritage that originated over a century ago. Note: A throttle sleeve is not included and must be re-used or purchased separately.

40,59  z VAT

With a big flange. Rubber grips with the classic barrel shape that was popular; way back when. A perfect solution to keep in touch with motorcycle heritage that originated over a century ago. Note: A throttle sleeve is not included and must be re-used or purchased separately.

44,28  z VAT

With a small flange. Rubber grips with the classic barrel shape that was popular; way back when. A perfect solution to keep in touch with motorcycle heritage that originated over a century ago. Note: A throttle sleeve is not included and must be re-used or purchased separately.

39,36  z VAT

With a small flange. Rubber grips with the classic barrel shape that was popular; way back when. A perfect solution to keep in touch with motorcycle heritage that originated over a century ago. Note: A throttle sleeve is not included and must be re-used or purchased separately.

1 624,83  z VAT

Cast aluminum OEM style pistons for a stock 1200cc Side Valve rebuild. Pistons include wrist pins; retainers & piston rings. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.