55,79  z VAT

55,79  z VAT

FITS MCS STD WIDTH FRAME + STD WIDTH MCS SWING

55,79  z VAT

230mm. fits MCS standard width frame + extra wide standard or Dragstyle swing

55,74  z VAT

For steel Cat Eye dash cover. A base plate is used to mount dash covers; speedometers and ignition switch to the gas tanks. Each base plate kit contains sockets for the dash lights; dash lights itself and mounting hardware. Note: Will not fit Evo flat side fuel tanks.

7,90  z VAT

Simple; low cost alternative to get the decibels of your drag pipe down. Great for custom baffle creations. Baffle; 4" (10.2 cm) long; made from zinc plated steel. Fits 2" (5.1 cm) outside diameter header pipes. Installs with included bolt.

41,73  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

47,74  z VAT

Standard 8.5:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

37,17  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

37,17  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

38,23  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

36,85  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

36,85  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

38,36  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

37,10  z VAT

Standard 9:1 compression ratio. Perfect for a stock rebuild. Piston includes the wristpin and wristpin clips. Note: Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

FILTR PALIWA/OLEJU ZBIORNIK PALIWA

Korek gazu, wkręcany

26,78  z VAT

Stainless steel; Non-vented; left side; left hand thread

48,01  z VAT

Standard 8.5:1CR. Perfect for a stock rebuild. These cast type pistons are well known for their low expansion rate. They have a substantial lower price than OEM forged pistons. Note: Each piston includes one wrist pin and two wrist pin clips. Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

50,96  z VAT

Standard 8.5:1CR. Perfect for a stock rebuild. These cast type pistons are well known for their low expansion rate. They have a substantial lower price than OEM forged pistons. Note: Each piston includes one wrist pin and two wrist pin clips. Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

50,96  z VAT

Standard 8.5:1CR. Perfect for a stock rebuild. These cast type pistons are well known for their low expansion rate. They have a substantial lower price than OEM forged pistons. Note: Each piston includes one wrist pin and two wrist pin clips. Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

48,01  z VAT

Standard 8.5:1CR. Perfect for a stock rebuild. These cast type pistons are well known for their low expansion rate. They have a substantial lower price than OEM forged pistons. Note: Each piston includes one wrist pin and two wrist pin clips. Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

47,93  z VAT

Standard 8.5:1CR. Perfect for a stock rebuild. These cast type pistons are well known for their low expansion rate. They have a substantial lower price than OEM forged pistons. Note: Each piston includes one wrist pin and two wrist pin clips. Piston rings must be purchased separately. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components; prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required. The rider must follow standard break-in and riding procedures for overhauled engines.

FILTR PALIWA/OLEJU ZBIORNIK PALIWA

Zbiornik gazu Sportster w stylu OEM, 2,4 galona

229,51  z VAT

Stock style replacement XL fuel tank. Left side 22mm petcock (not included). Compatible with 83-up screw type gas caps (not included). OEM style replacement for 61023-93. Note: 93-94 XL & 95-03 XL gas tanks are identical; apart from petcock location. 93-94 XL on the right side; 95-03 XL on the left side. Note: It is advised to pressure test; seal and test fit all tanks before tanks are painted and installed. Some tanks are painted; but this coat is applied for rust prevention during storage only.

52,51  z VAT

Polished aluminum. Replaces the OEM pressure plate; and hides the clutch springs. Great looker when running an open belt.

70,36  z VAT

- OEM style replacement - Zinc plated steel - Front - 11.5" diameter - With speedo drive gap - Counterbored 5/16" mounting holes - 50mm inner diameter - OEM replacement reference 44136-84A and 44136-92 - Mount style ''G''

230,78  z VAT

Front; 5/16 holes; 3/4 axle

46,44  z VAT

OEM reproduction. OEM replacement reference 43872-36.

SIEDZENIA KUFRY BAGAŻ

STELAŻ BAGAŻNIKA

64,93  z VAT

Black. Mounts to mounting holes of license plate bracket and seat. Maximum load 10lbs (4.5 kilo). Approx. dimensions: 9 1/2" long x 6" wide

59,00  z VAT

FL style rear turn signal bracket of 8-7/8" wide. Stock length. OEM replacement reference 68526-63.

327,30  z VAT

With amber backlit LEDs to light the symbols. Direct replacement switch housing switches; complete kit for models equipped with cruise control. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) wiring for stock applications.

304,63  z VAT

With amber backlit LEDs to light the symbols. Direct replacement switch housing switches; complete kit for radio equipped models. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) wiring for stock applications.

317,30  z VAT

With amber backlit LEDs to light the symbols. Direct replacement switch housing switches; complete kit for models equipped with cruise control. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) wiring for stock applications.

301,62  z VAT

With amber backlit LEDs to light the symbols. Direct replacement switch housing switches; complete kit for models equipped with cruise control. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) wiring for stock applications.

271,81  z VAT

Not lighted. Direct replacement switch housing switches; complete kit for radio equipped models. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) wiring for stock applications.