-
×
BEARING PINION RT 99-02
1 × 69,69 € -
×
FULL ADJ SHOCK FLH/FLT
1 × 1110,85 € -
×
GRIP DIAMOND CC TRACER
1 × 171,08 €
-
×
MCS, przewód biegu jałowego 42" (107 cm). Chrom
1 × 44,75 € -
×
Halder insert for Simplex mallet 40mm Plastic - Hard
1 × 7,90 €
310,99 € z VAT
This comes with approval. Old school style stretched fender for a ride the Killer Custom way. Hand-laid unpainted black gel coated fiberglass rear fender that is stiff; strong; straight; light and has a nice molded-in trim tip. Without license plate holder cut-out allowing custom license plate installation. Note: Requires drilling and fitment checks before painting and final assembly.Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
415,51 € z VAT
A shorter rear fender shows more tire; creating the uncompromised aggressive look. The fender is made of hand-laid black unpainted black gel coated fiberglass that is stiff; strong and straight. Includes seat tunnel/extension and mounting hardware. The fender comes with a seat pan; but the solo seat with upholstery is sold separately. Note: Matching solo seats are required and sold separately as ''Godzilla'' (575462) and ''Diamond'' (587865).
415,51 € z VAT
A shorter rear fender shows more tire; creating the uncompromised aggressive look. The fender is made of hand-laid black unpainted black gel coated fiberglass that is stiff; strong and straight. Includes seat tunnel/extension and mounting hardware. The fender comes with a seat pan; but the solo seat with synthetic leather upholstery is sold separately. Note: Matching solo seats are required and sold separately as ''Godzilla'' (575461) and ''Diamond'' (587866).
326,74 € z VAT
Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. The holder is mounted; via a special bracket; to the the stock mounting points on the swingarm and includes all required installation hardwareThis comes with approval. For 210 x 170mm size brackets (width x height). Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
326,74 € z VAT
Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. The holder is mounted; via a special bracket; to the the stock mounting points on the swingarm and includes all required installation hardwareThis comes with approval. For 170 x 170mm size brackets (width x height). Note: Compatible with 170mm x 175mm Italian plates. Small modifications may be required with 175mm x 175mm sized license plates.Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
326,74 € z VAT
Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. The holder is mounted; via a special bracket; to the the stock mounting points on the swingarm and includes all required installation hardwareThis comes with approval. For 210 x 130mm size brackets (width x height). Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
326,74 € z VAT
Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. The holder is mounted; via a special bracket; to the the stock mounting points on the swingarm and includes all required installation hardwareThis comes with approval. For 210 x 140mm size brackets (width x height). Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
195,31 € z VAT
Standard Duty. For 49mm conventional Forks. Lets you lower the front end of your bike up to two inches. Kit includes progressively wound springs; spacers and lowering components.
ZAWIESZENIE
203,47 € z VAT
For inverted forks. Drop your fork up to 2 inches in 30 minutes. No need to disassemble the forks; pulling the wheel or even changing the oil. The installation can be done without special tools. The Progressive Suspension shorter springs and the new secondary compensator springs makes this kit truly a drop-in installation and; in contradiction to popular belief; actually improves the ride quality.
Brak w magazynie
180,54 € z VAT
For inverted forks. Progressive rate fork springs of superior quality. Precision wound and made of high quality chrome silicon wire. Provides a smooth ride but the progressive rate helps prevent bottoming out when taking big bumps. Each kit comes with progressive fork springs and necessary spacers.
93,10 € z VAT
left side; Relocates brake caliper to proper position for 14" rotors; Black anodize billet aluminum finish; hardware included; Note: Compatible with below mentioned bikes; originally equipped with 11.5" brake rotors only
93,10 € z VAT
Right side; Relocates brake caliper to proper position for 14" rotors; Black anodized billet aluminum finish; hardware included; Note: Compatible with below mentioned bikes; originally equipped with 11.5" brake rotors only
93,10 € z VAT
Right side; Relocates brake caliper to proper position for 14" rotors; Black anodized billet aluminum; hardware included; Note: Compatible with below mentioned bikes; originally equipped with 11.5" brake rotors only
93,10 € z VAT
left side; Relocates brake caliper to proper position for 14" rotors; Black anodized billet aluminum finish; hardware included; Note: Compatible with below mentioned bikes; originally equipped with 11.5" brake rotors only
Brak w magazynie
5,52 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 1 on scale of 5. Soft for delicate; non damaging work. Color: Blue Diameter: 30mm. Weight: 23 gram.
7,74 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 1 on scale of 5. Soft for delicate; non damaging work. Color: Blue Diameter: 40mm. Weight: 47 gram.
14,28 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 1 on scale of 5. Soft for delicate; non damaging work. Color: Blue Diameter: 60mm. Weight: 135 gram.
Brak w magazynie
4,35 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from rubber. Hardness 2 on scale of 5. Impact cushioning. Color: Black Diameter: 30mm. Weight: 30 gram.
5,69 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from rubber. Hardness 2 on scale of 5. Impact cushioning. Color: Black Diameter: 40mm. Weight: 65 gram.
10,75 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from rubber. Hardness 2 on scale of 5. Impact cushioning. Color: Black Diameter: 60mm. Weight: 205 gram.
18,34 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from rubber. Hardness 2 on scale of 5. Impact cushioning. Color: Black Diameter: 80mm. Weight: 430 gram.
34,54 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from rubber. Hardness 2 on scale of 5. Impact cushioning. Color: Black Diameter: 100mm. Weight: 600 gram.
4,81 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 2 on scale of 5. Medium hard; non marring. Color: Grey. Diameter: 30mm. Weight: 22 gram.
6,33 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 2 on scale of 5. Medium hard; non marring. Color: Grey. Diameter: 40mm. Weight: 45 gram.
13,75 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from TPE (Thermoplastic Elastomers) that offers excellent stiffness and abrasion resistance. Hardness 2 on scale of 5. Medium hard; non marring. Color: Grey. Diameter: 60mm. Weight: 140 gram.
6,20 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Superplastic. Hardness 3 on scale of 5. Medium hard. Very durable and wear resistant. Color: White. Diameter: 30mm. Weight: 22 gram.
21,33 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Superplastic. Hardness 3 on scale of 5. Medium hard. Very durable and wear resistant. Color: White. Diameter: 60mm. Weight: 160 gram.
40,20 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Superplastic. Hardness 3 on scale of 5. Medium hard. Very durable and wear resistant. Color: White. Diameter: 80mm. Weight: 325 gram.
57,39 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Superplastic. Hardness 3 on scale of 5. Medium hard. Very durable and wear resistant. Color: White. Diameter: 100mm. Weight: 450 gram.
4,35 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Plastic. Hardness 4 on scale of 5. Hard; oil and grease resistant. Color: Red. Diameter: 30mm. Weight: 25 gram.
7,90 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Plastic. Hardness 4 on scale of 5. Hard; oil and grease resistant. Color: Red. Diameter: 40mm. Weight: 60 gram.
16,73 € z VAT
Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet for optimum versatility. Insert is made from Plastic. Hardness 4 on scale of 5. Hard; oil and grease resistant. Color: Red. Diameter: 60mm. Weight: 190 gram.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE