-
×
HANDGUARDS MX FLOW BK/WH
1 × 162,36 zł -
×
Paughco, 2 w 1 rury głowicy. (S-pipe). Chrom
1 × 2 784,72 zł
UKŁAD WYDECHOWY
Paughco, Tłumik wsuwany Touring Fishtail. Długość 32″. Prawy
2 514,12 zł z VAT
Chrome. Right side use. 3" diameter x 32" long. With mount; no additional hanger brackets needed. Note: See 908718 for left side muffler.
UKŁAD WYDECHOWY
2 173,41 zł z VAT
3" diameter. Fits left side. Tapered with Softail style mounts. No additional hanger brackets needed. Note: See 908722 for right side muffler.
UKŁAD WYDECHOWY
2 173,41 zł z VAT
3" diameter. Fits right side. Tapered with Softail style mounts. No additional hanger brackets needed. Note: See 908721 for left side muffler.
Brak w magazynie
UKŁAD WYDECHOWY
1 856,07 zł z VAT
Left side. Slip-on Fishtail extensions with 1 3/4" inlet and 1 7/8" diameter. Not baffled. No additional bracket required. Note: See 908727 for right side muffler.
Brak w magazynie
UKŁAD WYDECHOWY
1 856,07 zł z VAT
Left side. Slip-on Fishtail extensions with 1 3/4" inlet and 1 7/8" diameter. Not baffled. No additional bracket required. Note: See 908726 for left side muffler.
Brak w magazynie
UKŁAD WYDECHOWY
3 184,47 zł z VAT
Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Incl. 731SB12 and #731SB8 mounting plates. Heatshield front 903483; rear 903498. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
263,22 zł z VAT
Chrome plated steel. 1-7/8" (4.8 cm) inside diameter. Offset and with short mount strip.
264,45 zł z VAT
Light brown/beige. 1/16" (1.6mm) thick. 50ft. roll (approx. 15.25 meter). Looking for that extra edge in performance? Cooling exhaust gasses lose velocity and scavenging effect is reduced. This exhaust insulating wrap will improve horsepower by optimizing the thermal efficiency of the exhaust; and protects from nasty burns; in one go. Asbestos free. Note: Wrap ends can be secured with universal metal tie-wraps. Note: Material will discolor under influence of heat after installation.
Brak w magazynie
UKŁAD WYDECHOWY
292,74 zł z VAT
Black. 1/16" (1.6mm) thick. 50ft. roll (approx. 15.25 meter). Looking for that extra edge in performance? Cooling exhaust gasses lose velocity and scavenging effect is reduced. This exhaust insulating wrap will improve horsepower by optimizing the thermal efficiency of the exhaust; and protects from nasty burns; in one go. Asbestos free. Note: Wrap ends can be secured with universal metal tie-wraps. Note: Material will discolor under influence of heat after installation.
UKŁAD WYDECHOWY
303,81 zł z VAT
Copper color. 1/16" (1.6mm) thick. 50ft. roll (approx. 15.25 meter). Looking for that extra edge in performance? Cooling exhaust gasses lose velocity and scavenging effect is reduced. This exhaust insulating wrap will improve horsepower by optimizing the thermal efficiency of the exhaust; and protects from nasty burns; in one go. Asbestos free. Note: Wrap ends can be secured with universal metal tie-wraps. Note: Material will discolor under influence of heat after installation.
547,35 zł z VAT
4" (10cm) wide x 2ft. (61cm) long. Flexible heat resistant and insulating fabric for exhaust pipe heat radiation reduction. Identical to that of the Thermotec exhaust insulating wrap; with an extra woven cover with aluminum layer for up to 90% radiant heat protection. Installs with a hose clamp mount system.
UKŁAD WYDECHOWY
Thermo-Tec, Express Sleeve. 1-1/2″ (38 mm) x 12 stóp (3,6 metra)
1 102,08 zł z VAT
Heat resistant foil. Blocks up to 90% radiant heat of up to 2000řF (1093řC). Fire proof and fire resistant. A high temperature insulation material combined with a highly reflective mylar foil with a ''No Hassle'' hook-and-loop closure over it''s full length. Easy on & off; in seconds.
4 589,13 zł z VAT
Heat resistant foil. Blocks up to 90% radiant heat of up to 2000řF (1093řC). Fire proof and fire resistant. A high temperature insulation material combined with a highly reflective mylar foil with a ''No Hassle'' hook-and-loop closure over it''s full length. Easy on & off; in seconds.
227,55 zł z VAT
1/2" (12.7mm) dia. x 3ft. (91cm) long. Silicone covered fiberglass sleeves. Designed to protect wires and hoses from heat & abrasion. Continues heat protection up to 500řF (262řC) and short term exposure to 2000řF (1102řC).
290,28 zł z VAT
3/4" (19mm) dia. x 3ft. (91cm) long. Silicone covered fiberglass sleeves. Designed to protect wires and hoses from heat & abrasion. Continues heat protection up to 500řF (262řC) and short term exposure to 2000řF (1102řC).
391,14 zł z VAT
1" (25.4mm) dia. x 3ft. (91cm) long. Silicone covered fiberglass sleeves. Designed to protect wires and hoses from heat & abrasion. Continues heat protection up to 500řF (262řC) and short term exposure to 2000řF (1102řC).
391,14 zł z VAT
1" (25.4mm) dia. x 3ft. (91cm) long. Silicone covered fiberglass sleeves. Designed to protect wires and hoses from heat & abrasion. Continues heat protection up to 500řF (262řC) and short term exposure to 2000řF (1102řC).
UKŁAD WYDECHOWY
292,74 zł z VAT
91-09 conical ''late'' style. OEM replacement reference 65324-83A. Note: The 84-90 /10-up style is preferred by many for better flow characteristics. Note: The 91-09 late style is a conical (tapered) shaped gasket that was introduced by The Factory in 1991 and replaced; again; with the early style in 2010. Note that the early style will fit all models and is generally seen as the better gasket design.
Brak w magazynie
UKŁAD WYDECHOWY
3 455,07 zł z VAT
Chrome. S-pipe. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Rigid frame only; kickstart. Use 508090 and 512595 mount clamps. Heatshield rear 903399. Note: The S-pipe system has a 2-piece front header; like OEM; which is flattened to fit between engine and frame tube for improved ground clearance in right turns. May not fit custom rigid frames that are dimensionally different.
Brak w magazynie
UKŁAD WYDECHOWY
3 102,06 zł z VAT
Chrome. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Rigid frame; kickstart. Heatshield rear 903399.
Brak w magazynie
UKŁAD WYDECHOWY
3 231,21 zł z VAT
Chrome. 1-3/4" head pipes. If so desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Heatshield front 902387; rear 903397.
UKŁAD WYDECHOWY
5 340,66 zł z VAT
1-3/4" diameter. S-pipe; 4-piece system. Swingarm & rigid frames. Kickstart; mousetrap ok. 4-piece. Incl. Paughco 725E1 mount bracket. Heatshield crossover 903572; rear 903656. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
5 608,80 zł z VAT
S-pipe; 4-piece. swingarm frame; kick & e-start. Heatshield crossover 903481; left rear header 903573. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Brak w magazynie
UKŁAD WYDECHOWY
5 552,22 zł z VAT
1-3/4" diameter. Incl. mounting hardware. Heatshield left side crossover 903481; 902387 upper front; lower front 903484; lower front no notch 903487; rear 903564. Note: Heatshields must be ordered separately when required.
Brak w magazynie
UKŁAD WYDECHOWY
5 552,22 zł z VAT
1-3/4" diameter. Incl. mounting hardware. Heatshield left side crossover 903481; 902387 upper front; lower front 903484; lower front no notch 903487; rear 903564. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
5 340,66 zł z VAT
1-3/4" diameter. Incl. Paughco 725M mounting kit. Heatshield crossover 906459; front 903577; front lower 902392; rear 903563. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
5 140,17 zł z VAT
Incl. Paughco 725N mount bracket. Heatshield rear 902389; front 906457; front low notched 902392; crossover 906459. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
5 340,66 zł z VAT
Incl. Paughco 725N1 crossover bracket. Heatshield front 906457; front low notched 902392; rear 902389; crossover 906459. Note: Heatshields must be ordered separately when required.
UKŁAD WYDECHOWY
2 784,72 zł z VAT
S-pipe. Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. Heatshield rear 903656; for use with mechanical brake only. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
UKŁAD WYDECHOWY
2 784,72 zł z VAT
S-pipe. Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. With hydraulic brake (swing arm frame models). Kick & e-start. Heatshield rear 903656. Note: Will not fit 48-57 mechanical brake models (rigid frame models). Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Brak w magazynie
UKŁAD WYDECHOWY
3 008,58 zł z VAT
Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. With slider channel on front pipe. Incl. 902839 brake stop / exhaust hanger bracket. Heatshield front 902808; rear 902809. Note: Heatshields must be ordered separately when required.
Brak w magazynie
UKŁAD WYDECHOWY
2 902,80 zł z VAT
S-pipe. Popular classic conversion. Swingarm & rigid frames. Takes all mufflers with stock 1-3/4" inlet. Heatshield rear 516577. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE