Sizzling hot in the 60''s; a pure chopper classic as used in ''Easy Rider''. Straight cut rear. Low sides. 6" wide. Radius 38cm. Raw uncoated 1.5mm thick steel.
This comes with approval. Old school style stretched fender for a ride the Killer Custom way. Hand-laid unpainted black gel coated fiberglass rear fender that is stiff; strong; straight; light and has a nice molded-in trim tip. Without license plate holder cut-out allowing custom license plate installation. Note: Requires drilling and fitment checks before painting and final assembly.Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
A shorter rear fender shows more tire; creating the uncompromised aggressive look. The fender is made of hand-laid black unpainted black gel coated fiberglass that is stiff; strong and straight. Includes seat tunnel/extension and mounting hardware. The fender comes with a seat pan; but the solo seat with upholstery is sold separately. Note: Matching solo seats are required and sold separately as ''Godzilla'' (575462) and ''Diamond'' (587865).
A shorter rear fender shows more tire; creating the uncompromised aggressive look. The fender is made of hand-laid black unpainted black gel coated fiberglass that is stiff; strong and straight. Includes seat tunnel/extension and mounting hardware. The fender comes with a seat pan; but the solo seat with synthetic leather upholstery is sold separately. Note: Matching solo seats are required and sold separately as ''Godzilla'' (575461) and ''Diamond'' (587866).
Old fashioned German craftsmanship and dedication is held in high regard at NCC Germany. This makes it one of the finest precision fabricated fenders you will come across today. All are designed to offer a bolt-on no hassle fitment. Fender to fender struts are in & outside welded with a perfect finish. A cable routing option is is built-in. - With provision for the ECU - Fender is manufactured with 10mm offset for use with OEM frame and swingarm - Steel fender with approval - Fender struts that are welded to the inside of the fender for a smooth result - Manufactured with a BK Stiletto fender as base - The ''Inside Width'' size is the distance between the left & right inside of the fender (strut) Note: Due to manufacturing tolerances slight modifications may be required. Fitment checks advised. Note: A custom fabricated seat is required. A special NCC custom seat base plate for a custom seat is separately available as 904017 for 87-17 SoftailNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Old fashioned German craftsmanship and dedication is held in high regard at NCC Germany. This makes it one of the finest precision fabricated fenders you will come across today. All are designed to offer a bolt-on no hassle fitment. Fender to fender struts are in & outside welded with a perfect finish. A cable routing option is is built-in. - With provision for the ECU - Fender is manufactured with 10mm offset for use with OEM frame and swingarm - Steel fender with approval - Fender struts that are welded to the inside of the fender for a smooth result - Manufactured with a BK Stiletto fender as base - The ''Inside Width'' size is the distance between the left & right inside of the fender (strut) Note: Due to manufacturing tolerances slight modifications may be required. Fitment checks advised. Note: A custom fabricated seat is required. A special NCC custom seat base plate for a custom seat is separately available as 904017 for 87-17 SoftailNote: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Old fashioned German craftsmanship and dedication is held in high regard at NCC Germany. This makes it one of the finest precision fabricated fenders you will come across today. All are designed to offer a bolt-on no hassle fitment. Fender to fender struts are in & outside welded with a perfect finish. A cable routing option is is built-in. - No provision for the ECU - Fender is symmetrical & for use with OEM frame and swingarm - Steel fender with approval - Fender struts that are welded to the inside of the fender for a smooth result - Manufactured with a BK Stiletto fender as base - The ''Inside Width'' size is the distance between the left & right inside of the fender (strut) Note: Due to manufacturing tolerances slight modifications may be required. Fitment checks advised. Note: A custom fabricated seat is required. A special NCC custom seat base plate for a custom seat is separately available as 904017 for 87-17 Softail (excl. Rocker and Breakout).Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Old fashioned German craftsmanship and dedication is held in high regard at NCC Germany. This makes it one of the finest precision fabricated fenders you will come across today. All are designed to offer a bolt-on no hassle fitment. Fender to fender struts are in & outside welded with a perfect finish. A cable routing option is is built-in. - No provision for the ECU - Fender is symmetrical & for use with OEM frame and swingarm - Steel fender with approval - Fender struts that are welded to the inside of the fender for a smooth result - Manufactured with a BK Stiletto fender as base - The ''Inside Width'' size is the distance between the left & right inside of the fender (strut) Note: Due to manufacturing tolerances slight modifications may be required. Fitment checks advised. Note: A custom fabricated seat is required. A special NCC custom seat base plate for a custom seat is separately available as 904017 for 87-17 Softail (excl. Rocker and Breakout).Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Unpainted gloss black finish. Comes with 2 integrated LED taillights and 2 turn signals. This is a complete rear fender conversion kit that installs over the stock rear fender to give the bike an instant makeover with stunning results. The fender is an ABS construction; machined on modern 5-axis CNC machines for a 100% perfect fitment. Kit includes fender; mounting hardware; integrated LED taillights and turn signals. For installation the saddlebags should be removed after which the fender installs directly over the stock fender and mounts with the stock hardware of the seat. Comes with approval.Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
This seat is not designed to carry the weight of a passenger. Does not come with fender struts but with black powder coated side covers only. Parts include: Rear fender; seat pan; side covers; special bolts & grommets. ECE approved LED taillight. The ''Bobbstr'' is a short rear fender kit that will give your Softail a crazy cool power look. Compatible with the OEM solo seat. A seat pan is included for those who want to fabricate their own seat. If you feel no need to take the custom seat fabrication route; a special Killer Custom custom seat; with upholstery; is separately available as 921591 or 921592. This fender kit includes a taillight; the OEM turn signals require relocation. Made of hand-laid unpainted black gel coated fiberglass that is very stiff; strong; straight and light. Includes installation hardware and instructions. This comes with approval. Note: All parts require fitment checks before painting and final assembly. Note: A Killer Custom seat with upholstery is separately available as 921591 or 921592. Note: Seat pan foam only; without upholstery; is available as 921594. Note: For that true Killer look; using a lowering kit; available from Killer Custom as 587888 is recommended; it offers 20mm or 30mm lowering.Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Cut-Out for single muffler. A direct replacement for stock fenders of FLT/Touring models. Compatible with all tires up to 200mm and made from primed pre-drilled composite (fiberglass) material that is ready to paint. Comes with Plug & Play Ness taillight / turn signal / licenseplate mount; which fits inside the recessed area of the fender; internal steel fender supports and a flexible hidden antenna. Arlen Ness advises to use the Bagger fenders in combination with Ness saddlebag extensions or Ness Big Bags for best visual effect. Gives the bike a clean look and the gap; as present between the stock fender and saddlebags; is filled nicely. Note: Does not fit in combination with Tour Pakr back rests or quick detachable back rests although custom fitment is possible. Note: The recessed taillight mount will take US sized license plates only.
- 294mm wide. - 340mm radius. - 140cm long. - 1.5mm thick steel. Round top styled. Designed for bikes without suspension (rigid frames); where the fender can be mounted closer to the tire. A special; smaller; radius is used to let the fender ''hug'' the tire better; to get that cool low-down custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
- 240mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Round top styled. Designed for bikes without suspension (rigid frames); where the fender can be mounted closer to the tire. A special; smaller; radius is used to let the fender ''hug'' the tire better; to get that cool low-down custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only. Note: Designed for 220/50/20 series tires.
KASKI PEŁNE
KASKI OTWARTE
KURTKI MOTOCYKLOWE
SPODNIE
BUTY
RĘKAWICE