1 563,33  z VAT

UK wall plug. 4 bank charger 12V. Allows charging / maintaining 1 up to 4 batteries at once. Dimensions: 19.5cm wide x 9cm high x 17.5cm Deep.Microprocessor controlled; 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. CE approved. Note: When using multi-bank chargers; with the batteries in the bikes; you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

280,44  z VAT

UK wall plug. 12V 0.8A. 110-240V. For up to 10Ah batteries. Waterproof; suitable for outdoor use. Resin filled ''crush proof'' case. Forgetting it on the floor then driving over it with your SUV. It can handle it! Charges flooded; sealed; maintenance free; AGM and lead acid batteries. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions approx. 7cm long; 10.7cm wide; 3.6cm high.

779,82  z VAT

UK wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled; 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. CE approved. Note: When using multi-bank chargers; with the batteries in the bikes; you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

+
Brak w magazynie
560,88  z VAT

UK wall plug. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger; ready for portable operations or permanent mounting in a garage etc. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved.

1 124,22  z VAT

8A 12V charger. For 3Ah to 180Ah lead-acid (AGM; GEL; EFB; MF; CaCa) and lithium batteries. The CS ONE has APTOT (Adaptive Charging) technology to recognise the type of battery you want to charge and tells how long it will need to charge it. There are no buttons on the CS ONE; just connect any lead-acid or lithium battery and simply charge. Polarity free clamps mean you don't even need to worry about which clamp goes where; so you'll never make a wrong connection again. The clamps are spark free too; so don't worry if you accidentally touch them together Unlock additional features using the Bluetoothr enabled CTEK App. Select `RECOND' to restore and recondition your battery. Choose `WAKE UP' for lithium batteries with under voltage protection or to bring deeply discharged lead-acid batteries back to life. Select `SUPPLY' to turn the CS ONE into a useful 12 V supply

210,33  z VAT

UK wall plug. 12V 0.8A. For up to 10Ah batteries. Selectable Lithium or flooded; sealed; maintenance free; AGM and lead acid batteries. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions 8.3cm x 5cm x 3.5cm.

+
Brak w magazynie
467,40  z VAT

UK wall plug. 4.0A. Selectable 6/12V. Selectable Lithium or flooded; sealed; maintenance free; AGM and lead acid batteries. Microprocessor controlled; 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program; initialization / bulk charge / absorption mode / float mode; as required. A red LED indicates a ''dead'' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process; until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions 17.2cm x 9.3cm x 4.9cm.

338,25  z VAT

With UK wall plug.0.8A 12V trickle charger. Charges 12V lead acid batteries from 1.2Ah. to 32Ah and will even maintenance charge large; up to 100Ah.; batteries. Compact; the smallest in the CTEK line up and comes with a fully automated 6 step charge sequence. Simple to use and you can follow the whole charging process on the clear; easy to read display. - 12V. - 0.8 Amps. - 1.2 Ah to 32 Ah. lead-acid batteries. - 6 steps. - Clamps. - Eyelet connector. - Splash and dust proof (IP65). - Lead Acid batteries. - 1.2 Ah to 32 Ah. - Safe spark free operation. - Reverse polarity protected. - Short circuit proof.

+
Brak w magazynie
462,48  z VAT

With UK wall plug. 2.3A 12V charger. For 5Ah to 25Ah batteries. Auto-selects lead acid; AGM and Lithium (LiFePO4; Li-Fe; Li-iron; LFP) batteries. Offers three fully automatic charging and maintenance programs with a fully automated 6 step charge sequence. A special reconditioning (Recond) mode is used for helping to save deeply discharged lead-acid batteries. - 12V. - 2.3 Amps. - Lead Acid batteries. - AGM batteries. - Lithium mode. - Reconditioning mode. - 6 steps. - Clamps. - Eyelet connector. - Splash and dust proof (IP65). - Safe spark free operation. - Reverse polarity protected. - Short circuit proof.

483,39  z VAT

UK wall plug. 0.8A / 3.8A 12V charger. For 1.2Ah-85Ah lead-acid (AGM; GEL; EFB; MF; CaCa) batteries. With a mode button to switch between charging bike (0.8A) and car (3.8A) batteries. Offers a fully automated 7 step charge and maintenance sequence. Features include battery diagnosis to establish whether your battery can receive and retain a charge; a patented desulphation program and a ''Snowflake'' program for charging on cold days. With CTEK''s patented float/pulse system; which is the most efficient maintenance mode when a battery is connected for long periods. Simple to use and you can follow the whole charging process on the clear; easy to read display. - 12 volts. - 0.8A (bike) and 3.8A (car) modes. - Lead-acid batteries. -AGM mode. - 7 steps. - Clamps. - Eyelet connector. - Safe spark free operation. - Reverse polarity protected. - Splash and dust proof (IP65).

576,87  z VAT

UK wall plug. 5.0A 12V charger. For 1.2Ah to 110Ah lead-acid (AGM; GEL; EFB; MF; CaCa) batteries. The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-110Ah. It comes with automatic temperature compensation built in which ensures the best charging performance; even in the most extreme conditions. The MXS 5.0 also includes battery diagnosis to establish whether your battery can receive and retain a charge; patented automatic desulphation program; an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 5.0 uses CTEK's patented float/pulse system; which is the most efficient maintenance mode when a battery is connected for long periods. - 12V. - 5.0A. - Lead-acid batteries. - Reconditioning mode. - Easy to read LED display. - Safe spark free operation. - Reverse polarity protected. - Short circuit proof. - Splash and dust proof (IP65).

323,49  z VAT

With UK wall plug. Will charge 12V lead-acid; AGM and Lithium LiFePO4 batteries with a 1.0A charge. Can be used as trickle charger. - Clear split between Lithium and lead-acid charging modes and algorithms - Battery Recovery for deeply discharged batteries - Battery health check after charging - Maintaining mode; with 4 hour intervals voltage checks - Protected against reverse polarity; overcharging; overcurrent; overheating and short-circuit - User friendly detection for reverse polarity; low-voltage or damaged batteries - IP 65 splash and dust proof for outdoor use - Adjusts for varying A/C line voltage and delivers consistent charging current - 8 step lead acid charging - 7-step Lithium charging - Input: 220-240V AC 50-60Hz - Output: 12V 1A DC - Dimensions: 180 x 80 x 40mm - Weight: 0.4 kg - IP rating: IP 65 - Battery: 2-40 Ah > Charge; 2 - 100 Ah > Maintenance

448,95  z VAT

With UK wall plug. Will charge 12V & 6V lead-acid; AGM and Lithium LiFePO4 batteries. Selectable 1A or 4A charging. With digital screen. Can be used as trickle charger. - Specific AGM mode for sealed batteries - Digital screen with live voltage reading - Hook attachment - Suitable for 6V and 12V batteries - 1A and 4A selectable charge - Clear split between Lithium and lead-acid charging modes and algorithms - Battery Recovery for deeply discharged batteries - Battery health check after charging - Maintaining mode; with 4 hour intervals voltage checks - Protected against reverse polarity; overcharging; overcurrent; overheating and short-circuits - User friendly detection for reverse polarity; low-voltage or damaged batteries - IP 65 splash and dust proof for outdoor use - Adjusts for varying A/C line voltage and delivers consistent charging current - 8 step lead acid charging - 7-step Lithium charging - Input: 220-240V AC 50-60Hz - Output: 6V or 12V 1A or 4A DC - Dimensions: 210 x 87 x 50mm - Weight: 0.6 kg - IP rating: IP 65 - Battery: 4-80 Ah > Charge; 4 - 120 Ah > Maintenance