CABLE UNIVERSAL W/ PROBES

Universal terminal cable with two output lines: K and L.

NOTE: This terminal cable (which must be connected to the main cable 3151/AP01), is used to connect to specific systems or particular diagnostic sockets.

You need to connect a specific cable end sleeve, that in turn must be connected to a specific pin on the vehicle’s socket, to the terminal cable’s output line (usually the K one) in order to establish the communication.

The output line, the cable end sleeve that must be used and the socket’s pin are displayed in the diagnostic software.

The use of this combination is very common in the blink-code diagnoses in which you must establish a communication with the control unit.