Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Order 506472 bracket and 506473 clamps separately. 902814 brake stop required on 80-85 XL. Heatshield front 903469; rear 903473. Note: Heatshields must be ordered separately when required.

Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Swingarm frames. Fit rigids when mechanical brake crossover tube is removed. Slider channels front & rear. Heatshield rear 903478. Note: This is not a 2-piece S-pipe system. Front pipe is routed below frame tube. Less ground clearance in right turns. Note: Rear pipe routed under transmission. Less ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Un-baffled and 1-3/4" diameter. Includes Paughco 718N1 hanger bracket. Heatshield front 903469; rear 903408 Note: Heatshields must be ordered separately when required.

Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Rigid frame only. Slider channels. Incl. 902839 exh. hanger/brake stop bracket. Heatshield front 902808; rear 903396. Note: Heatshields must be ordered separately when required.

Standard 1 3/4" diameter; slash cut end. No baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Use 980487 P-clamps for mounting. Note: No heat shields available.

S-pipe. 1 3/4" diameter; slash cut end. Without baffles. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. rigid frame; kickstart; slider channels. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. S-pipe; rigid frame; kickstart; slider channels. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Rigid frame; e-start with wrap around oil tank only; slider channels. Heatshield front 902658; rear 903403. Note: Heatshields must be ordered separately when required.

Extra short with 34". Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. No slider channels; will not mount to OEM bracket. Use 512595 P-clamps to mount. Heatshield front 902387; rear 903496. Note: Heatshields must be ordered separately when required.

Un-baffled 1-3/4" diameter. Fits electric start & custom kickstart applications. Includes mounting brackets and hardware. Heatshield front 903483; rear 903491. Note: Heatshields must be ordered separately when required.